ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5935-00-004-1975, 5935000041975
JACK,TIP

Federal Supply Classification
FSC 5935 - Connectors, Electrical
National Item Identification Number
NIIN 000041975
Codification Country
United States
Item Name Code
INC 15077
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5935-00-004-1975
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5935-00-004-1975


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5935-00-004-1975

National Stock Number (NSN) 5935-00-004-1975, or NIIN 000041975, (jack,tip) was assigned May 27, 1972 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 02, 2006, this NSN's acquisition method was noted as: Acquire only from the prime contractor although the engineering data identifies the Commercial and Government Entity Code (CAGE) and part number of a source other than the prime contractor. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 15077. [AN ELECTRICAL FITTING WITH A FEMALE CONTACT ARRANGED FOR THE INSERTION OF A PLUG, TIP OR A TIP, TEST PROD. IT HAS A SINGLE FACILITY FOR ATTACHMENT OF A CONDUCTOR OR FACILITY FOR CIRCUIT CONNECTION THROUGH ITS MOUNTING PROVISIONS. THE ITEM MAY OR MAY NOT BE INSULATED. EXCLUDES:MULTISECTION TYPES EACH SECTION OF WHICH CONSISTS OF A SINGLE CONTACT SPRING OR TELEPHONE-TYPE JACK. EXCLUDES:CONNECTOR, RECEPTACLE ELECTRICAL; JACK, TELEPHONE; JACK ASSEMBLY, TIP; AND POST, BINDING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5935000041975 contains silver.

This NSN is associated to Schedule B 8548900100: electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85. The Schedule B End Use is listed as electric apparatus. NAICS classification category 335999: all other miscellaneous electrical equipment and component manufacturing.

This information was last updated on .


Technical Characteristics

III ACCOMMODATED FINGER TYPE
(AFXS) TEST PROD SINGLE FINGER
MATERIAL
(MATT) PLASTIC POLYAMIDE CAP
SURFACE TREATMENT
(SURF) SILVER SPRING
MATERIAL
(MATL) PLASTIC, POLYAMIDE INSULATOR
MATERIAL
(MATL) ANY ACCEPTABLE TERMINAL
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
MATERIAL
(MATT) PLASTIC POLYAMIDE BUSHING
III PRECIOUS MATERIAL
(PRMT) SILVER
MATERIAL
(MATT) PLASTIC POLYAMIDE BODY
III PRECIOUS MATERIAL AND LOCATION
(PMLC) SPRING SURFACE SILVER
MATERIAL
(MATL) BERYLLIUM COPPER SPRING
UNABLE TO DECODE
(SURF) UNABLE TO DECODE
MATERIAL
(MATL) PLASTIC, POLYAMIDE CAP
MATERIAL
(MATT) PLASTIC POLYAMIDE INSULATOR
ELECTRICAL INSULATION FEATURE
(AALV) INSULATED COMPLETELY
ACCOMMODATED FINGER TYPE
(AFXS) TEST PROD SINGLE FINGER
BODY LENGTH
(ADAQ) 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
BODY STYLE
(AAQL) PRESS FIT
BUSHING ACCOMMODATION HOLE SHAPE
(AFRX) ROUND
BUSHING THRU-HOLE ACCOMMODATION DIAMETER
(AFYM) 0.170 INCHES MINIMUM AND 0.174 INCHES MAXIMUM
FINGER ACCOMMODATION DIAMETER
(AFXY) 0.080 INCHES MINIMUM AND 0.082 INCHES MAXIMUM SINGLE FINGER
FINGER ACCOMMODATION LENGTH
(AFXZ) 0.328 INCHES NOMINAL SINGLE FINGER
IDENTIFICATION CODE COLOR
(AAPC) BLACK
OVERALL DIAMETER
(ADAV) 0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
OVERALL LENGTH
(ABHP) 0.685 INCHES MINIMUM AND 0.715 INCHES MAXIMUM
MATERIAL
(MATT) COPPER ALLOY SPRING
MATERIAL
(MATT) PLASTIC POLYAMIDE (NYLON) BUSHING
MATERIAL
(MATT) PLASTIC POLYAMIDE (NYLON) CAP
MATERIAL
(MATT) PLASTIC POLYAMIDE (NYLON) BODY
MATERIAL
(MATT) PLASTIC POLYAMIDE (NYLON) INSULATOR
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 1 BUSHING
PRECIOUS MATERIAL AND LOCATION
(PMLC) SPRING SURFACE SILVER
PRECIOUS MATERIAL
(PRMT) SILVER
SURFACE TREATMENT
(SFTT) SILVER SPRING
TERMINAL TYPE
(CSCF) TURRET
MATERIAL
(MATL) PLASTIC, POLYAMIDE BODY
MATERIAL
(MATL) PLASTIC, POLYAMIDE BUSHING

Manufacturer Part Numbers


Related Inventory

105-1043-001
Condition FN
ELECT. CIRCUIT
Readily Available


 
Top