ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-530-5354, 5340005305354
Cancelled -> Replaced by 5340002055715

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 005305354
Codification Country
United States
Item Name Code
INC 03796
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-530-5354
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-530-5354


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-530-5354

National Stock Number (NSN) 5340-00-530-5354, or NIIN 005305354, (clevis,rod end) was assigned January 1, 1963 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN replaces 1 stock number, 5340002055715.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 3 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is very common among different weapons systems, belonging to 25 different platforms.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. The 24 month forecast from the US Government for this part number has low volatility, with an estimated forecasted value of US$ 1,272. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Oct 29, 2015, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 03796. [A FORKED PART, HAVING TRANSVERSE HOLE(S) OR SLOT(S) IN EACH ARM (PRONG) TO ACCOMMODATE A BOLT, PIN, OR THE LIKE, AND HAVING A CONNECTION FACILITY OPPOSITE THE FORK. IT IS DESIGNED TO BE ATTACHED TO A SHAFT, ROD, TURNBUCKLE OR THE LIKE BY WELDING, THREADING, AND/OR PINNING. MAY INCLUDE PROVISIONS FOR LOCKING. SEE ALSO YOKE, UNIVERSAL JOINT AND CONNECTOR, ROD END. FOR ITEMS SPECIFICALLY DESIGNED FOR AVIATION, SEE CLEVIS, ROD END, AVIATION.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340005305354 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

FORK ARM THICKNESS
(AKYW) 0.068 NOMINAL MILS AND 0.073 NOMINAL CENTIMETERS
DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END
(AKYH) 0.313 INCHES NOMINAL
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END
(AKYV) 1.298 INCHES MINIMUM AND 1.328 INCHES MAXIMUM
END RADIUS
(ABPZ) 0.188 INCHES NOMINAL
FORK ARM THICKNESS
(AKYW) 0.068 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
FORK DEPTH
(AKYX) 0.375 INCHES NOMINAL
FORK SPAN WIDTH
(AJSD) 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM
HOLE DIAMETER
(AAUB) 0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
NOMINAL THREAD SIZE
(CQJX) 0.138 INCHES ROD CONNECTION
OVERALL WIDTH
(ABMK) 0.255 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
MATERIAL
(MATT) STEEL OVERALL
METALLIC HARDNESS RATING
(AETC) 26.0 MINIMUM ROCKWELL C AND 31.0 MAXIMUM ROCKWELL C
SECURING PIN HOLE DIAMETER
(AKYE) 0.046 INCHES NOMINAL
SHANK DIAMETER
(AAZE) 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
SHANK LENGTH
(AATR) 0.673 INCHES MINIMUM AND 0.703 INCHES MAXIMUM
THREAD CLASS
(AAJD) 3A ROD CONNECTION
THREAD DIRECTION
(AAJF) RIGHT-HAND ROD CONNECTION
THREAD LENGTH
(AASA) 0.203 INCHES MINIMUM ROD CONNECTION AND 0.297 INCHES MAXIMUM ROD CONNECTION
THREAD SERIES DESIGNATOR
(THSD) UNF ROD CONNECTION
STYLE DESIGNATOR
(STYL) CLEVIS
SURFACE TREATMENT
(SFTT) CADMIUM OVERALL OR ZINC OVERALL
III MATERIAL
(MATT) STEEL OVERALL

Manufacturer Part Numbers


Related Inventory

AN665-10R
5340005305354
Condition NS
CLEVIS ROD
Readily Available


 
Top