National Stock Number
5340-01-665-6435
National Stock Number (NSN) 5340-01-665-6435, or NIIN 016656435, (standoff,threaded,spacing) was assigned August 7, 2017 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.
There are no manufacturer part numbers associated to this NSN.
This part number has not been procured by the US Government in over 5 years.
This NSN is unique to one weapons system.
Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 08, 2017, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.
This NSN is assigned to Item Name Code (INC) 40280. [A STANDOFF THAT MUST HAVE A THREADED END(S) OR BE INTERNALLY THREADED ITS FULL LENGTH. FOR ITEMS HAVING EXTERNAL THREADS ON BOTH ENDS, SEE STUD (AS MODIFIED). FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME FOR THE ENTIRE LENGTH, ARE FLAT ON TOP AND BOTTOM, HAVING INTERNAL THREADS ITS FULL LENGTH, AND THE LENGTH DOES NOT EXCEED TWICE THE WIDTH ACROSS THE FLATS OR OUTSIDE DIAMETER, SEE NUT (AS MODIFIED); USE MAXIMUM DIMENSIONS(S) FOR COMPLIANCE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340016656435 does not contain precious metals.
This information was last updated on Apr 01, 2024.