ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-304-7739, 5340003047739
CLEVIS,ROD END

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 003047739
Codification Country
United States
Item Name Code
INC 03796
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-304-7739
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-304-7739


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-304-7739

National Stock Number (NSN) 5340-00-304-7739, or NIIN 003047739, (clevis,rod end) was assigned October 21, 1973 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 03796. [A FORKED PART, HAVING TRANSVERSE HOLE(S) OR SLOT(S) IN EACH ARM (PRONG) TO ACCOMMODATE A BOLT, PIN, OR THE LIKE, AND HAVING A CONNECTION FACILITY OPPOSITE THE FORK. IT IS DESIGNED TO BE ATTACHED TO A SHAFT, ROD, TURNBUCKLE OR THE LIKE BY WELDING, THREADING, AND/OR PINNING. MAY INCLUDE PROVISIONS FOR LOCKING. SEE ALSO YOKE, UNIVERSAL JOINT AND CONNECTOR, ROD END. FOR ITEMS SPECIFICALLY DESIGNED FOR AVIATION, SEE CLEVIS, ROD END, AVIATION.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340003047739 does not contain precious metals.

This information was last updated on .


Technical Characteristics

III MATERIAL
(MATT) STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) MIL-S-6758,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT
(SFTT) CADMIUM OVERALL
THREAD CLASS
(AAJD) 3A ROD CONNECTION
MATERIAL
(MATT) STEEL COMP 4130 OVERALL
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END
(AKYV) 2.000 INCHES NOMINAL
END RADIUS
(ABPZ) 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
FORK DEPTH
(AKYX) 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
FORK SPAN WIDTH
(AJSD) 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM
FORK ARM THICKNESS
(AKYW) 0.095 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HOLE DIAMETER
(AAUB) 0.250 INCHES MINIMUM AND 0.252 INCHES MAXIMUM
OVERALL WIDTH
(ABMK) 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
SHANK DIAMETER
(AAZE) 0.312 INCHES NOMINAL
SHANK LENGTH
(AATR) 1.120 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) CLEVIS
SPECIAL FEATURES
(FEAT) THD END MACHINE GROOVE PER DS2278-5 36659
FORK ARM THICKNESS
(AKYW) 0.095 NOMINAL MILS AND 0.110 NOMINAL CENTIMETERS
THREAD SERIES DESIGNATOR
(THSD) UNJF ROD CONNECTION
NOMINAL THREAD SIZE
(CQJX) 0.312 INCHES ROD CONNECTION
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) LC+77-1061,LOCKHEED AIRCRAFT CORP MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD DIRECTION
(AAJF) RIGHT-HAND ROD CONNECTION
THREAD LENGTH
(AASA) 1.000 INCHES NOMINAL ROD CONNECTION

Manufacturer Part Numbers


Related Inventory

1203382-101
5340003047739
Condition NS
CLEVIS
Readily Available


 
Top