ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-127-3185, 5340001273185
BRACKET,ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 001273185
Codification Country
United States
Item Name Code
INC 16900
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-127-3185
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-127-3185


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-127-3185

National Stock Number (NSN) 5340-00-127-3185, or NIIN 001273185, (bracket,angle) was assigned November 25, 1968 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Dec 20, 2008, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The data needed to produce this item from additional sources is not physically available. Valid AMCs: 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 16900. [A RIDGE ITEM, USUALLY OF FLAT MATERIAL, FORMED INTO A DIHEDRAL ANGLE (GENERALLY A RIGHT ANGLE) WHICH MAY BE REINFORCED; IT IS DESIGNED TO POSITION, ALIGN, OR SUPPORT AN ITEM(S) IN RELATION TO ANOTHER. EXCLUDES:BRACE (AS MODIFIED); BRACKET (1), MOUNTING; AND BRACKET, SHELF.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340001273185 contains an unknown precious metal.

This NSN is associated to Schedule B 8302500000: hat-racks, hat pegs, brackets and similar fixtures, and parts thereof, of base metal. The Schedule B End Use is listed as cell phones and other household goods, n.e.c.. NAICS classification category 337127: institutional furniture manufacturing.

This information was last updated on .


Technical Characteristics

FIRST LEG ANGLE
(CSSQ) 120.5 DEGREES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) TWO HOLES
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHQU) 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG THICKNESS
(AHPW) 0.080 INCHES NOMINAL
FIRST LEG HOLE DIAMETER
(AHLK) 0.208 INCHES MINIMUM AND 0.214 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
FIRST LEG WIDTH
(AHQN) 3.670 INCHES MINIMUM AND 3.730 INCHES MAXIMUM
HEAT TREATMENT
(HEAT) T-3 SOLUTION HEAT TREATED
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) ALUMINUM ALLOY 2024
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 1.070 INCHES MINIMUM AND 1.130 INCHES MAXIMUM
SECOND LEG CORNER RADIUS
(AHLG) 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) CORNER RADIUS
SECOND LEG THICKNESS
(AHPX) 0.080 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) ONE HOLE
SECOND LEG HOLE DIAMETER
(AHLN) 0.390 INCHES MINIMUM AND 0.397 INCHES MAXIMUM
SECOND LEG LENGTH
(ADLL) 1.170 INCHES MINIMUM AND 1.230 INCHES MAXIMUM
SECOND LEG WIDTH
(AHLF) 3.670 INCHES MINIMUM AND 3.730 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) ANGLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) MIL-A-6808 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) CHROMATE ZINC
III HEAT TREATMENT
(HEAT) T-3 SOLUTION HEAT TREATED

Manufacturer Part Numbers


Related Inventory

206-070-804-1
5340001273185
Condition NS
BRACKET
Readily Available
206-0708041
5340001273185
Condition AR
BRACKET
Readily Available


 
Top