National Stock Number
5306-01-109-9054
National Stock Number (NSN) 5306-01-109-9054, or NIIN 011099054, (bolt,machine) was assigned March 24, 1981 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.
There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.
This part number has not been procured by the US Government in over 5 years.
This NSN is unique to one weapons system.
Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Dec 13, 2013, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.
This NSN is assigned to Item Name Code (INC) 01847. [AN EXTERNALLY THREADED FASTENER DESIGNED FOR INSERTION THROUGH HOLES IN ASSEMBLED PARTS AND NORMALLY INTENDED TO BE TIGHTENED OR RELEASED BY TORQUING A NUT. THE THREADED AND UNTHREADED PORTIONS ARE BOTH OF ONE NOMINAL DIAMETER OF 0.190 INCH (5 MM) OR LARGER. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER OR BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. HEAD DIMENSIONS AND SIZES OF THREADED AND UNTHREADED PORTIONS SHALL CONFORM TO INTERNATIONALLY RECOGNIZED FASTENER STANDARDS. FOR ITEMS HAVING A GRIP LENGTH PORTION MACHINED TO A TOLERANCE OF 0.0015 INCH (0.038 MM) OR LESS, BOLT, SHEAR. SEE ALSO SCREW, CAP, HEXAGON HEAD AND SCREW, MACHINE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 5306011099054 does not contain precious metals.
This NSN is associated to Schedule B 7318152000: bolts and bolts and their nuts or washers exported in the same shipment. The Schedule B End Use is listed as iron and steel products, other. NAICS classification category 332722: bolt, nut, screw, rivet, and washer manufacturing.
This information was last updated on Jul 01, 2025.