National Stock Number
5340-01-334-6810
National Stock Number (NSN) 5340-01-334-6810, or NIIN 013346810, (standoff,threaded,spacing) was assigned February 25, 1991 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.
There are 2 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.
This part number has not been procured by the US Government in over 5 years.
This NSN is unique to one weapons system.
Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Oct 18, 2010, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
This NSN is assigned to Item Name Code (INC) 40280. [A STANDOFF THAT MUST HAVE A THREADED END(S) OR BE INTERNALLY THREADED ITS FULL LENGTH. FOR ITEMS HAVING EXTERNAL THREADS ON BOTH ENDS, SEE STUD (AS MODIFIED). FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME FOR THE ENTIRE LENGTH, ARE FLAT ON TOP AND BOTTOM, HAVING INTERNAL THREADS ITS FULL LENGTH, AND THE LENGTH DOES NOT EXCEED TWICE THE WIDTH ACROSS THE FLATS OR OUTSIDE DIAMETER, SEE NUT (AS MODIFIED); USE MAXIMUM DIMENSIONS(S) FOR COMPLIANCE.]. The item is a non-aviation Critical Safety Item (CSI) whose failure will result in serious damage to equipment or serious injury or death to personnel. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340013346810 does not contain precious metals.
This information was last updated on Jun 01, 2025.