National Stock Number (NSN) 5365-00-197-5316, or NIIN 001975316, (spacer,ring) was assigned January 1, 1961 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.
There are 8 manufacturer part numbers associated with this NSN. 3 of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.
This part number has not been procured by the US Government in over 5 years.
Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 26, 2008, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.
This NSN is assigned to Item Name Code (INC) 24307. [A CIRCULAR-SHAPED ITEM DESIGNED TO MAINTAIN PREDETERMINED DISTANCE BETWEEN ASSEMBLED PARTS AND/OR FOR DISTRIBUTING PRESSURE OR PREVENTING ENDWISE MOVEMENT BETWEEN MEMBER PARTS. IT HAS A SOLID CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE DISTANCE BETWEEN THE BEARING SURFACES PERPENDICULAR TO THE AXIS OF THE CENTRALLY LOCATED HOLE SHALL NOT EXCEED 25 PERCENT OF THE OUTSIDE DIAMETER. THE DIAMETER OF THE CENTRALLY LOCATED HOLE MUST EXCEED 75 PERCENT OF THE OUTSIDE DIAMETER. EXCLUDES:LAMINATED ITEMS. FOR ITEMS MANUFACTURED FROM IMPREGNATED GRAPHITE OR LUBRICATED NONMETALLIC MATERIALS, EXCLUDING FELT OR PLASTICS, SEE GASKET. FOR ITEMS MANUFACTURED FROM LUBRICATED PLASTICS, SEE BEARING, WASHER, THRUST. FOR ITEMS MANUFACTURED FROM LUBRICATED FELT, SEE FELT, MECHANICAL, PREFORMED. EXCLUDES:DISK, VALVE; INSULATOR WASHER; AND SHIM. SEE ALSO SPACER, PLATE AND SPACER, SLEEVE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 5365001975316 contains an unknown precious metal.
This NSN is associated to Schedule B 7415290000: copper screws, nuts, bolts, rivets, and other fasteners not threaded. The Schedule B End Use is listed as finished metal shapes. NAICS classification category 332722: bolt, nut, screw, rivet, and washer manufacturing.
This information was last updated on Jul 01, 2025.