National Stock Number
5307-01-272-7539
National Stock Number (NSN) 5307-01-272-7539, or NIIN 012727539, (stud,plain) was assigned February 13, 1988 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.
There are 2 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts. ISO Group has several sources of supply for this NSN.
This part number has not been procured by the US Government in over 5 years.
This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.
There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Dec 13, 2013, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.
This NSN is assigned to Item Name Code (INC) 15948. [A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. THE MAXIMUM DIAMETER OF THE UNTHREADED PORTION MUST NOT BE GREATER THAN THE NOMINAL THREAD DIAMETER PLUS 0.020 INCHES (0.508 MM). THE UNTHREADED PORTION MUST BE WITHOUT LOCKING OR WRENCHING PROVISIONS. IT MAY BE THREAD RELIEVED. SEE ALSO ROD, THREADED END AND ROD, CONTINUOUS THREAD.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 5307012727539 does not contain precious metals.
This information was last updated on Jun 01, 2025.