ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 1630-00-056-2329, 1630000562329
Cancelled -> Replaced by 1630009916994

Federal Supply Classification
FSC 1630 - Aircraft Wheel and Brake Systems
National Item Identification Number
NIIN 000562329
Codification Country
United States
Item Name Code
INC 11007
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 1630-00-056-2329
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 1630-00-056-2329


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 1630-00-056-2329

National Stock Number (NSN) 1630-00-056-2329, or NIIN 000562329, (cylinder assembly,hydraulic brak) was assigned January 1, 1963 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN replaces 2 stock numbers: 1630007168616, 1630009916994.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 3 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has been procured by the US Government within the last year, but shows no recent (last 90 days) procurement activity. There have been 2 contracts issued for this part number, with 2 awards given. There is minimal competition for this NSN. The US Government has awarded contracts to 2 different suppliers. The last contract numbers awarded were: SPE4A725F6192, SPE4A724F5779, SPE4A724F5779. The total value of the awarded contracts has been US$ 1,057,353.00.

There has been a small amount of demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Mar 11, 2020, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) Acquisition of this part is restricted to source(s) specified on "Source Control", "Altered Item" or "Selected Item" drawings/documents. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 11007. [A DEVICE CONSISTING OF A RESERVOIR AND/OR CYLINDER, HYDRAULIC BRAKE, MASTER WITH OTHER COMPONENTS NECESSARY TO DISPLACE FLUID FROM A CENTRAL SOURCE FOR ACTUATING THE SLAVE OR WHEEL CYLINDERS OF A HYDRAULIC BRAKE SYSTEM.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 1630000562329 does not contain precious metals.

This information was last updated on .


Technical Characteristics

TEMP RATING
(ABJH) -65.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT
PORT THREAD CLASS
(CLNB) 3B SINGLE PORT
TEMP RATING
(ABJH) 275.0 DEG FAHRENHEIT
BORE DIAMETER
(ABXV) 1.188 INCHES NOMINAL
FIRST PISTON ROD END LUBRICATION FACILITY (NON-CORE)
(CLLN) INCLUDED
PORT LOCATION AND QUANTITY
(CLMS) 1 PISTON ROD END
PORT STYLE
(CLMT) GASKET SEAL SINGLE PORT
PORT THREAD QUANTITY PER INCH
(CLMY) 20 SINGLE PORT
SEAT ANGLE IN DEG
(AJFY) 45.0
FIRST END THICKNESS AT MOUNTING HOLES
(AMPC) 0.437 NOMINAL CENTIMETERS
FIRST PISTON ROD END STYLE
(CKSF) BEARING TYPE
PORT THREAD SERIES DESIGNATOR
(CLMW) UNF SINGLE PORT
UNABLE TO DECODE
(AAFZ) UNABLE TO DECODE
BORE DIAMETER
(ABXV) 1.520 INCHES NOMINAL
PORT THREAD SERIES DESIGNATOR
(CLMW) UNF
PORT THREAD CLASS
(CLNB) 3B
ACTUATION METHOD
(AFLW) DIRECT
BLEEDING FEATURE QUANTITY
(CLND) 1
BODY OUTSIDE DIAMETER
(ADAR) 1.840 INCHES MAXIMUM
COMPRESSED LENGTH
(AMQZ) 11.500 INCHES NOMINAL
EXTENDED LENGTH
(ATEM) 13.000 INCHES NOMINAL
FIRST PISTON ROD END STYLE
(CKSF) UNABLE TO DECODE
MATERIAL
(MATT) UNABLE TO DECODE
MOUNTING FACILITY DIAMETER
(CLMQ) 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
MOUNTING FACILITY LENGTH
(ABKP) 1.440 INCHES NOMINAL
MOUNTING TYPE AND LOCATION
(CLML) TONGUE CYLINDER HEAD END
MOUNTING PROVISION
(ABDR) PIN
OVERALL DIAMETER
(ADAV) 1.940 INCHES NOMINAL
PORT LOCATION AND QUANTITY
(CLMS) 1 PISTON ROD END AND 2 CENTER SECTION
PORT THREAD CLASS
(CLNB) UNABLE TO DECODE
PORT STYLE
(CLMT) UNABLE TO DECODE
PORT THREAD DIAMETER
(CLMX) UNABLE TO DECODE
PORT THREAD SERIES DESIGNATOR
(CLMW) UNABLE TO DECODE
PORT THREAD QUANTITY PER INCH
(CLMY) UNABLE TO DECODE
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
(ZZZY) AS DIFFERENTIATED BY SOURCE CONTROL DWG NO. 114HS105 FSCM 77272
RESERVOIR TYPE
(BMWH) REMOTE
SEAT ANGLE IN DEG
(AJFY) UNABLE TO DECODE
STRAIGHT BORE INSIDE DIAMETER
(BYXG) 1.188 INCHES MINIMUM AND 1.520 INCHES MAXIMUM
TEMP RATING
(ABJH) -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT
TEST DATA DOCUMENT
(TEST) 77272-114HS105 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
FIRST END OUTSIDE DIAMETER
(AAHB) UNABLE TO DECODE
UNABLE TO DECODE
(ABXV) UNABLE TO DECODE
MATERIAL
(MATT) ALUMINUM ALLOY 356.0 BODY
FIRST END THICKNESS AT MOUNTING HOLES
(AMPC) UNABLE TO DECODE
BODY MATERIAL
(AAFZ) ALUMINUM ALLOY, QQ-A-596, ALLOY 356, T6
FIRST END OUTSIDE DIAMETER
(AAHB) 0.770 INCHES MINIMUM AND 0.830 INCHES MAXIMUM ALL WORKING ENDS
SEAT ANGLE IN DEG
(AJFY) 45.0 SINGLE PORT
FIRST END THICKNESS AT MOUNTING HOLES
(AMPC) 0.432 INCHES MINIMUM AND 0.437 INCHES MAXIMUM ALL WORKING ENDS
PORT THREAD QUANTITY PER INCH
(CLMY) 20
FIRST END HOLE DIAMETER
(AMDX) 0.2500 INCHES MAXIMUM
FIRST END HOLE DIAMETER
(AMDX) UNABLE TO DECODE
PORT THREAD DIAMETER
(CLMX) 0.438 INCHES NOMINAL SINGLE PORT
FIRST END THICKNESS AT MOUNTING HOLES
(AMPC) 0.432 NOMINAL MILS
UNABLE TO DECODE
(CLLN) UNABLE TO DECODE
PORT LOCATION AND QUANTITY
(CLMS) 2 CENTER SECTION
FIRST END OUTSIDE DIAMETER
(AAHB) ERR-070
FIRST END HOLE DIAMETER
(AMDX) 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM ALL WORKING ENDS
SECOND PISTON ROD END LUBRICATION FACILITY (NON-CORE)
(CLLZ) NOT INCLUDED
UNABLE TO DECODE
(CLLZ) UNABLE TO DECODE
MOUNTING FACILITY DIAMETER
(CLMQ) 0.2500 INCHES MAXIMUM
FIRST PISTON ROD END STYLE
(CKSF) BEARING TYPE ALL WORKING ENDS
PORT STYLE
(CLMT) GASKET SEAL

Manufacturer Part Numbers


Related Inventory

tste718050-1000
TE718050-1000
Condition NE
TE SERIES NEEDL
Readily Available
381805010
NC381805010
Condition NE
Nacecare OEM Pa
Readily Available
31GE06
T18050-100.0
Condition NE
Thymidine: 100
Readily Available
518-0501-00
Condition NS
CHAVE INVERSOR
Readily Available
LB180501-001
4820001452395
Condition NS
STEM
Readily Available


 
Top