ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 2520-01-041-0277, 2520010410277
SHAFT,AXLE,AUTOMOTIVE

Federal Supply Classification
FSC 2520 - Vehicular Power Transmission Components
National Item Identification Number
NIIN 010410277
Codification Country
United States
Item Name Code
INC 10852
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 2520-01-041-0277
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 2520-01-041-0277


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 2520-01-041-0277

National Stock Number (NSN) 2520-01-041-0277, or NIIN 010410277, (shaft,axle,automotive) was assigned May 19, 1977 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, there are no suppliers listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is assigned to Item Name Code (INC) 10852. [A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES:SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 2520010410277 contains an unknown precious metal.

This NSN is associated to Schedule B 8483909500: parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts. The Schedule B End Use is listed as industrial machines, other. NAICS classification category 333613: mechanical power transmission equipment manufacturing.

This information was last updated on .


Technical Characteristics

FLANGE HOLE TAPER
(BNYW) 4.249 INCHES PER SQUARE INCH BLANK
III MATERIAL
(MATL) STEEL
MATERIAL
(MATL) STEEL
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
III MATERIAL
(MATT) STEEL
FIRST END BEARING SEAT
(BNTF) NOT INCLUDED
FIRST END FACILITY DIAMETER
(BNPJ) 1.874 INCHES MINIMUM AND 1.876 INCHES MAXIMUM
FIRST END FACILITY LOCATION
(BNTD) 16.750 IN. FROM FLANGE FACE
FIRST END FACILITY WIDTH
(BNTC) 0.880 INCHES NOMINAL
FIRST END ENGAGING/LOCKING/POSITIONING FACILITY
(BNTB) SHOULDER
FIRST END TYPE
(AMQA) FLANGED
FLANGE HOLE TAPER
(BNYW) 4.249 INCHES NOMINAL PER FOOT
FLANGE OUTSIDE DIAMETER
(AHTC) 6.250 INCHES NOMINAL
FLANGE OVERALL THICKNESS
(BNYS) 0.617 INCHES MINIMUM AND 0.620 INCHES MAXIMUM
FLANGE THICKNESS AT MOUNTING HOLE
(BNYT) 0.437 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
OVERALL LENGTH
(ABHP) 36.565 INCHES NOMINAL
MATERIAL
(MATT) STEEL
METALLIC HARDNESS RATING
(AETC) 55.0 MAXIMUM ROCKWELL C
MOUNTING FACILITY TYPE AND QUANTITY
(AXHR) 8 TAPERED HOLE
SECOND END BEARING SEAT
(BNTT) NOT INCLUDED
SECOND END SPLINE LENGTH
(AMGA) 2.250 INCHES NOMINAL
SECOND END SPLINE MAJOR DIAMETER
(AMGC) 1.745 INCHES MINIMUM AND 1.750 INCHES MAXIMUM
SECOND END SPLINE MINOR DIAMETER
(AMGB) 1.560 INCHES MINIMUM AND 1.590 INCHES MAXIMUM
SECOND END SPLINE QUANTITY
(BBCF) 16
SECOND END SPLINE TYPE
(BNTM) STRAIGHT
SECOND END TYPE
(AMQF) SPLINED
TAPER MAJOR DIAMETER
(ABQB) 0.783 INCHES NOMINAL

Manufacturer Part Numbers


Related Inventory

G5972019
520420
Condition NE
Regina Red Wine
Readily Available
3ZK47
11597201
Condition NE
Building Wire:
Readily Available
812RX8
7000-13565-97201
Condition NE
Cordset: M12 Fe
Readily Available
R459720-1EA
Condition NE
2(3 4-DI-ME-PH)
Readily Available
15972-01
Military
Readily Available
M227597-20-1
WM22759/07-20-1
Condition NE

Readily Available
5320-00-959-7201
HL18PB-5-12
Condition NS
PIN,RIVET
Readily Available
259-7201-100
5930011415842
Condition NS
SWITCH
Readily Available


 
Top