ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 2540-00-155-8780, 2540001558780
MOTOR,HYDRAULIC

Federal Supply Classification
FSC 2540 - Vehicular Furniture and Accessories
National Item Identification Number
NIIN 001558780
Codification Country
United States
Item Name Code
INC 06128
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 2540-00-155-8780
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 2540-00-155-8780


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 2540-00-155-8780

National Stock Number (NSN) 2540-00-155-8780, or NIIN 001558780, (motor,hydraulic) was assigned November 24, 1971 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jul 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 06128. [A MECHANICAL DEVICE DESIGNED TO CONVERT THE ENERGY OF FLUID PRESSURE TO ROTARY MOTION.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 2540001558780 does not contain precious metals.

This NSN is associated to Schedule B 8412298075: hydraulic power engines and motors, nesoi. The Schedule B End Use is listed as industrial engines. NAICS classification category 333996: fluid power pump and motor manufacturing.

This information was last updated on .


Technical Characteristics

HOUSING MATERIAL
(AJLF) IRON, CAST
THREAD DIRECTION
(AAJF) RIGHT-HAND AND RIGHT-HAND
CONNECTION QUANTITY
(ASMM) 1 AND 1
CONNECTION QUANTITY
(ASMM) 2
III DISPLACEMENT TYPE
(AXFP) CONSTANT
DISPLACEMENT TYPE
(AXFP) CONSTANT
DRIVE SHAFT TYPE
(AJAB) KEYED
CONNECTION DESIGN
(AXFC) THREADEDTHREADED AND THREADED
CONNECTION QUANTITY
(ASMM) 21
CONNECTION TYPE
(AWLS) DRAIN AND INLET AND OUTLET
KEY HEIGHT
(AXFE) 0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
KEY LENGTH
(AAST) 1.250 INCHES NOMINAL
KEY WIDTH
(ABSF) 0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
OPERATING SPEED AT RATED CAPACITY IN RPM
(AEQC) 1800.0
MATERIAL
(MATT) IRON CAST HOUSING
MOUNTING BOLT CIRCLE DIAMETER
(AFFL) 2.875 INCHES NOMINAL
MOUNTING BOLT HOLE SPACING
(AZFG) 5.750 IN. BY 5.750 IN.
MOUNTING HOLE DIAMETER
(ABTB) 0.562 INCHES NOMINAL
MOUNTING HOLE QUANTITY
(ABTJ) 2
MOUNTING TYPE
(AAXX) FACE
SCREW THREAD SERIES DESIGNATOR
(AJYP) UNF AND UN
SHAFT DIAMETER
(ABWV) 1.248 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
SHAFT ROTATION DIRECTION
(AKCT) CLOCKWISE AND COUNTERCLOCKWISE
THREAD DIRECTION
(AAJF) RIGHT-HANDRIGHT-HAND
THREAD LOCATION
(APJC) INTERNALINTERNAL
THREAD SIZE
(ABUJ) 0.750-16 AND 1.625-12
TORQUE LOAD RATING
(AAPL) 70.0 INCH-POUNDS OR 80.0 INCH-POUNDS
SURFACE TREATMENT
(SFTT) ENAMEL HOUSING
HOUSING SURFACE TREATMENT
(AZFH) ENAMELED
CONNECTION DESIGN
(AXFC) THREADED
THREAD LOCATION
(APJC) INTERNAL
THREAD DIRECTION
(AAJF) RIGHT-HAND
THREAD LOCATION
(APJC) INTERNAL AND INTERNAL
CONNECTION DESIGN
(AXFC) THREADED AND THREADED AND THREADED

Manufacturer Part Numbers


Related Inventory



 
Top