ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 3040-01-040-1973, 3040010401973
DIFFERENTIAL GEAR UNIT

Federal Supply Classification
FSC 3040 - Miscellaneous Power Transmission Equipment
National Item Identification Number
NIIN 010401973
Codification Country
United States
Item Name Code
INC 61761
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(N) There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials.
Availability: Request Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 3040-01-040-1973
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 3040-01-040-1973


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 3040-01-040-1973

National Stock Number (NSN) 3040-01-040-1973, or NIIN 010401973, (differential gear unit) was assigned May 4, 1977 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jul 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 61761. [AN ARRANGEMENT OF GEARS IN AN EPICYCLIC TRAIN THAT CONNECTS TWO SHAFTS IN THE SAME LINE. THE DRIVING FORCE IS EQUALLY DIVIDED BETWEEN THE SHAFTS WHICH ROTATE IN DIFFERENT DIRECTIONS WITH ONE SHAFT PERMITTED TO REVOLVE FASTER THAN THE OTHER.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 3040010401973 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

SPECIAL FEATURES
(FEAT) FMAXIMUM LOST MOTION MEASURED BETWEEN END GEARS 30 MINUTES OF ARC CHECKED AT ROOM AMBIENT AND 1 IN-OZ OF REVERSING TORQUE; END GEARS AND REMAINING PARTS CORROSION RESISTANT STEEL, CLASS 303, COND A PER QQ-S-764; CROSS SHAFT AND CENTER SHAFT, CORROSION RESISTANT STEEL, CLASS 416, COND T PER QQ-S-764, 26-32 ROCKWELL C; BEVEL GEARS CORROSION RESISTANT STEEL CLASS 416 PER QQ-S-764, 18 ROCKWELL C MINIMUM; PINIONS, CORROSION RESISTANT STEEL, CLASS 416, 18 ROCKWELL C MINIMUM, PER QQ-S-764 WITH BALL BEARINGS, MINIMUM CROSS SHAFT DIAMETER 0.078 INCHE; LENGTH 1.716 INCHES; ASSEMBLY C/O THREE GEARS, 2 ARE 45 TEETH AND 1 IS 12 TEETH; GEARS 1 AND 2 PITCH DIAMETER 0.6250 INCHES; 3RD GEAR PITCH DIAMETER 0.1500 INCHES
END ITEM IDENTIFICATION
(AGAV) E-3A AWACS
SPECIAL FEATURES
(FEAT) MAXIMUM LOST MOTION MEASURED BETWEEN END GEARS 30 MINUTES OF ARC CHECKED AT ROOM AMBIENT AND 1 IN-OZ OF REVERSING TORQUE; END GEARS AND REMAINING PARTS CORROSION RESISTANT STEEL, CLASS 303, COND A PER QQ-S-764; CROSS SHAFT AND CENTER SHAFT, CORROSION RESISTANT STEEL, CLASS 416, COND T PER QQ-S-764, 26-32 ROCKWELL C; BEVEL GEARS CORROSION RESISTANT STEEL CLASS 416 PER QQ-S-764, 18 ROCKWELL C MINIMUM; PINIONS, CORROSION RESISTANT STEEL, CLASS 416, 18 ROCKWELL C MINIMUM, PER QQ-S-764 WITH BALL BEARINGS, MINIMUM CROSS SHAFT DIAMETER 0.078 INCHE; LENGTH 1.716 INCHES; ASSEMBLY C/O THREE GEARS, 2 ARE 45 TEETH AND 1 IS 12 TEETH; GEARS 1 AND 2 PITCH DIAMETER 0.6250 INCHES; 3RD GEAR PITCH DIAMETER 0.1500 INCHES

Manufacturer Part Numbers


Related Inventory



 
Top