ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 3110-01-237-5328, 3110012375328
PLATE,RETAINING,BEARING

Federal Supply Classification
FSC 3110 - Bearings, Antifriction, Unmounted
National Item Identification Number
NIIN 012375328
Codification Country
United States
Item Name Code
INC 22293
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(N) There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 3110-01-237-5328
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 3110-01-237-5328


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 3110-01-237-5328

National Stock Number (NSN) 3110-01-237-5328, or NIIN 012375328, (plate,retaining,bearing) was assigned July 31, 1986 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 3 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jul 15, 2014, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 22293. [A COMPARATIVELY FLAT RIGID ITEM, WITH OR WITHOUT A CENTRALLY LOCATED APERTURE, DESIGNED TO HOLD AN ANNULAR BEARING OR A SLEEVE BEARING IN A FITTED INCLOSURE. IT MUST HAVE DRILLED AND/OR TAPPED HOLES FOR MOUNTING PURPOSES. EXCLUDES:END BELL, ELECTRICAL ROTATING EQUIPMENT.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 3110012375328 does not contain precious metals.

This NSN is associated to Schedule B 8482997090: parts, nesoi, for roller bearings or for combined ball/roller bearings, nesoi. The Schedule B End Use is listed as industrial machines, other. NAICS classification category 332991: ball and roller bearing manufacturing.

This information was last updated on .


Technical Characteristics

MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) UNABLE TO DECODE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) UNABLE TO DECODE
MATERIAL
(MATT) UNABLE TO DECODE
SURFACE TREATMENT
(SFTT) UNABLE TO DECODE
APERTURE DIAMETER
(ABVL) INCHES NOMINAL 1.894
COUNTERBORE DIAMETER
(CWGF) INCHES MINIMUM 2.0635 AND INCHES MAXIMUM 2.0645
COUNTERBORE DEPTH
(CWHX) INCHES MINIMUM 0.406 AND INCHES MAXIMUM 0.410
DISTANCE BETWEEN HOLES ALONG WIDTH
(ADNZ) INCHES NOMINAL 3.500
DISTANCE BETWEEN HOLES ALONG LENGTH
(ADNY) INCHES NOMINAL 3.500
DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE
(CWJN) INCHES NOMINAL 1.750
DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE
(CWHW) INCHES NOMINAL 1.750
INSIDE RAISED SURFACE DIAMETER
(CWKW) INCHES MINIMUM 2.0635 AND INCHES MAXIMUM 2.0645
LENGTH
(ABRY) INCHES NOMINAL 4.500
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 11,T651
MATERIAL
(MATT) OVERALL ALUMINUM ALLOY 6061
MINOR THICKNESS
(ABMB) INCHES MINIMUM 0.930 AND INCHES MAXIMUM 0.940
MOUNTING HOLE DIAMETER
(ABTB) INCHES MINIMUM 0.179 AND INCHES MAXIMUM 0.185
MOUNTING HOLE TYPE
(CWJW) ROUND, UNTHREADED
OUTSIDE RAISED SURFACE DIAMETER
(CWLK) INCHES NOMINAL 0.407
OVERALL THICKNESS
(ADUM) INCHES MINIMUM 1.745 AND INCHES MAXIMUM 1.755
RAISED SURFACE HEIGHT
(CKSR) INCHES NOMINAL 1.375
SPECIAL FEATURES
(FEAT) ONE 0.156 IN. DIA MIN TO 0.160 IN. DIA MAX BLIND HOLE IN OUTER FACE,0.190 IN. DP,COUNTERSUNK 0.187 IN. DIY BY 100.0 DEG,W/ONE MS16562 TUBULAR PIN SPRING INSERTED,LOCATED 0.812 IN. BELOW HORIZ CL AND 1.312 IN. LEFT OF VERT CL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) BORE MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541,CLASS 1A
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) INNER FACE AS MOUNTED MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541,CLASS 1A
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) OUTER FACE AS MOUNTED MFR REF SINGLE TREATMENT RESPONSE 887193,FSC- 49956
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) RAISED SURFACE MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541,CLASS 1A
SURFACE TREATMENT
(SFTT) BORE CHROMATE
SURFACE TREATMENT
(SFTT) OUTER FACE AS MOUNTED ENAMEL
SURFACE TREATMENT
(SFTT) INNER FACE AS MOUNTED CHROMATE
SURFACE TREATMENT
(SFTT) RAISED SURFACE CHROMATE

Manufacturer Part Numbers


Related Inventory



 
Top