ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 3220-01-372-8676, 3220013728676
MORTISER,HOLLOW CHISEL,HORIZONTAL

Federal Supply Classification
FSC 3220 - Woodworking Machines
National Item Identification Number
NIIN 013728676
Codification Country
United States
Item Name Code
INC 07444
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(N) There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 3220-01-372-8676
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 3220-01-372-8676


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 3220-01-372-8676

National Stock Number (NSN) 3220-01-372-8676, or NIIN 013728676, (mortiser,hollow chisel,horizontal) was assigned March 20, 1993 in the Federal Logistics Information System (FLIS). NIIN 013728676 was cancelled on June 2, 2013, with a cancelled status of "Item is Cancelled WITHOUT Replacement." There is no known replacement specified for this stock number. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Mar 01, 2020, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 07444. [A WOODWORKING MACHINE UTILIZING ONE OR MORE SQUARE HOLLOW CHISELS INSIDE OF WHICH A BORING BIT IS ROTATED AT HIGH SPEED ON A HORIZONTAL SPINDLE. THE CHISEL HAS A RAPID OSCILLATING MOTION, WHICH IS ADJUSTABLE FOR DEPTH OF MORTISE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 3220013728676 does not contain precious metals.

This information was last updated on .


Technical Characteristics

MAXIMUM CHISEL SIZE ACCOMMODATED
(BCRL) 0.375 INCHES
ERR DEFAULT
(BCRL) ERR DEFAULT
MAXIMUM DISTANCE FROM TABLE TO HORIZONTAL CHISEL CENTERLINE
(BCRP) 20.000 INCHES
HORSEPOWER RATING
(ASQQ) 1.00
CURRENT TYPE
(ACDC) AC
FURNISHED ITEMS AND QUANTITY
(AKYN) MAGNETIC CONTROL 1; TABLE CLAMP 1
SPINDLE QUANTITY
(BCRH) 1
POWER SOURCE
(ATJK) ELECTRIC MOTOR
SPECIAL FEATURES
(FEAT) TABLE CAN BE LOWERED BY MEANS OF A HANDWHEEL AND SCREW,TO PERMIT MORTISING IN THE EDGE OF STOCK 7 UP TO 20 IN. WIDE WHEN USING THE TABLE. THE TABLE KNEE,WITH THE TABLE ATTACHED,CAN BE REMOVED FROM THE MACHINE IN FIVE MINUTES. WITH THE TABLE REMOVED THE MACHINE WILL MORTISE IN THE END OF STOCK UP TO 32 IN. WIDE. TABLE TRAVEL IS 9 IN. HORIZONTALLY. THE MOTOR HEAD SLIDES ON V-WAYS SCRAPED TO CLOSE TOLERANCES,AFTER ACCURATE PLANING. THE WAYS HAVE GIBS WITH SET SCREWS TO TAKE UP POSSIBLE FUTURE WEAR. THREE SLIDES ARE LOCATED ON THE VERTICAL WAYS. THE MOTOR IS CARRIES ON ONE SLIDE; THE M9OTOR IS EQUIPPED WITH TRUST BALL BEARING TO HANDLE THRUST OF THE BIT; MOTOR IS 3600 RPM
FEED METHOD
(AMWX) HAND
ERR DEFAULT
(BCRQ) ERR DEFAULT
ERR DEFAULT
(BCRP) ERR DEFAULT
MAXIMUM DISTANCE FROM FENCE TO CHISEL CENTER
(BCRQ) 4.000 INCHES
VOLTAGE IN VOLTS
(ELEC) 115.0
FREQUENCY IN HERTZ
(FREQ) 60.0
TABLE LENGTH
(ARDQ) 28.000 INCHES NOMINAL
PHASE
(FAAZ) SINGLE

Manufacturer Part Numbers


Related Inventory

MS20819-4D
Sleeve, Couplin
Readily Available
HLT194DU-6
Condition NE
HI-LOK HI-TIGUE
Readily Available
HLT194DU6
Condition NE
HI-LOK HI-TIGUE
Readily Available
194D106X9010E2T
SMD Tantalum
Readily Available
194D105X9050EMK45
SMD Tantalum
Readily Available
194D686X9004Y2T
SMD Tantalum
Readily Available
MS20819-4D
4730-00-302-8641
Condition NE
Sleeve - Tube O
Readily Available
194D105X9020B8TR06
SMD Tantalum
Readily Available
194D226X9015G7K223
SMD Tantalum
Readily Available
194D105X0020BZ
SMD Tantalum
Readily Available
194D106X9015F8TM
SMD Tantalum
Readily Available
194D335X9035F7
SMD Tantalum
Readily Available
AN919-4D
AS5174D0602 1/
Condition NE
Reducer - Alumi
Readily Available
194D474X0050C2T
SMD Tantalum
Readily Available
HLT194DU-8
Condition NE
HI-LOK HI-TIGUE
Readily Available
S194D10-0
Readily Available
194D156X9010F7K223
SMD Tantalum
Readily Available
194D475X9010D7K223
SMD Tantalum
Readily Available
194D226X0020H2T
SMD Tantalum
Readily Available
194D226X9015G7ZC
SMD Tantalum
Readily Available
194D335X9020D2T
SMD Tantalum
Readily Available
194D105X0035D7
SMD Tantalum
Readily Available
194D336X9015H7K223
SMD Tantalum
Readily Available
194D475X0015E2T
SMD Tantalum
Readily Available
7671CMS20819-4D
4730-00-580-7471
Condition NE
SLEEVE, FLARED
Readily Available
194D106X9006E2
SMD Tantalum
Readily Available
194D107X0010H2
SMD Tantalum
Readily Available
194D685X9025G8TM
SMD Tantalum
Readily Available
194D475X9010D7BB
SMD Tantalum
Readily Available
194D475X9035G7K206
SMD Tantalum
Readily Available
10194D
Condition NE
Readily Available
HLT194DU-6
5320013050248
Condition NS
PIN
Readily Available
P194D10-0
Readily Available
194D156X0015G7K
SMD Tantalum
Readily Available
AN919-4D
Reducer, Extern
Readily Available
54LS194DM
Readily Available
7671CAN819-4D
Condition NE
SLEEVE
Readily Available
194D685X9035H7BR
SMD Tantalum
Readily Available
194D105X5035D2BC
SMD Tantalum
Readily Available
194D105X9020B7BR
SMD Tantalum
Readily Available
194D475X0010D8B
SMD Tantalum
Readily Available
194D685X9010E7BB
SMD Tantalum
Readily Available
194D156X9025H7BB
SMD Tantalum
Readily Available
194D336X0010F2
SMD Tantalum
Readily Available
194D225X9020D8BP
SMD Tantalum
Readily Available
'MS20819-4D
Condition NS
BUSHING
Readily Available
194D475X9050H7K
SMD Tantalum
Readily Available
194D106X5025G7BR
SMD Tantalum
Readily Available
194D336X9015H7BB
Readily Available
AN819-4D
Condition NS
SLEEVE
Readily Available
194D475X9015E2B
SMD Tantalum
Readily Available
194D226X0020H8BP
SMD Tantalum
Readily Available
S194D10-1
Readily Available
194D684X9015A4B
SMD Tantalum
Readily Available
74S194DC
Readily Available
194D105X9010A2B
SMD Tantalum
Readily Available
194D475X5015E2BP
SMD Tantalum
Readily Available
194D156X9020G8BC
SMD Tantalum
Readily Available
194D225X9020D8BR
SMD Tantalum
Readily Available
194D335X0050G7TR
SMD Tantalum
Readily Available
194D335X9050G7BP
SMD Tantalum
Readily Available
S194D25-1
Readily Available
MS20819-4D
MS20819-4D
Condition NE
Readily Available
7671CAN919-4D
Condition NE
REDUCER
Readily Available
RC4194DC
Readily Available
S194D4-0
Readily Available
194D106X9025G7BM
SMD Tantalum
Readily Available
194D226X0020H7BM
SMD Tantalum
Readily Available
194D336X9015H7K
SMD Tantalum
Readily Available
156060G0194D090
Condition FN
HOSE ASSEMBLY
Readily Available
156F062E0194D350
Condition FN
HOSE ASSEMBLY
Readily Available
AN819-4D
MS20819-4D
Condition FN
FITTING, SLEEVE
Readily Available
AN919-4D
AS5174D0602
Condition FN
FITTING, UNION
Readily Available
AS5174D0602
AN919-4D
Fitting, Reduce
Readily Available


 
Top