NSN 3416-00-174-9171, 3416001749171
LATHE,ENGINE

Federal Supply Classification: FSC 3416 - Lathes
National Item Identification Number: NIIN 001749171
Codification Country: United States
Item Name Code: INC 03137
Criticality: (N) This item does not have a critical feature such as tolerance, fit restrictions or application. Nuclear hardness properties have not been determined (not valid for input).
Hazardous Material Indicator Code: (N) There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials.

Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know

CALL ABOUT NSN 3416-00-174-9171

Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

REQUEST QUOTE for 3416-00-174-9171

Have a list that needs to be quoted? Upload it here.

Upload a List

DLMS^® Summary

National Stock Number 3416-00-174-9171

National Stock Number (NSN) 3416-00-174-9171, or NIIN 001749171, (lathe,engine) was assigned January 1, 1963 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 29, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 03137. This item does not have a critical feature such as tolerance, fit restrictions or application. Nuclear hardness properties have not been determined (not valid for input). There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 3416001749171 does not contain precious metals.

This information was last updated on Jul 01, 2025.

Technical Characteristics

UNABLE TO DECODE: (AWHA) UNABLE TO DECODE
UNABLE TO DECODE: (BTYW) UNABLE TO DECODE
III MOUNTING TYPE: (AAXX) BENCH
HEADSTOCK CENTER TAPER SIZE DESIGNATOR: (BTWM) 2 ASA STANDARD
GEAR CHANGE TYPE: (BTYW) QUICK
ELECTRIC MOTOR HORSEPOWER RATING: (ASHK) 0.75
ELECTRIC MOTOR QUANTITY: (AWLX) 1
ACCESSORY COMPONENTS AND QUANTITY: (AKYD) 2 BELT,FLAT,V-DR.;1 BENCH-LATHE;1BIT,LATHE TOOL HOLDER,HIGH SPEED STEEL,BORING,3/16BY3/16IN.TURNING 1/4BY1/4IN.;2 BLADE LATHE TOOL HOLDER,CUT OFF,HIGH SPEED STEEL,3/32BY5/8 IN.;2 CTR.,LATHE,PIPE,1/2BY 3 IN.;2 CTR.,LATHE,60 DEG.NO.2 MORSE TAPER;2 CHUCK,DRILL,3 JAW,0 TO 1/2 IN.;2 CHUCK,LATHE,FITTED,IND.,4 JAW,REV.,8 IN.,UNIV.,3 JAW,W/2 SETS JAWS,1 SET INTERNAL,1 SET EXT.,6 IN.;2 COLLET,SPLIT,F/ROUND WORK,1/16,1/8,3/16,1/4,5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4,7/8,1 IN.;2 COLLET ATTACHMENT,H/WHEEL TYPE,1/16 TO 1 IN.;2 CUTTING ATTACHMENT,MILLING AND KEYWAY;2 LATHE,BENT TAIL,SINGLE SCREW,SINGLE,3/8,3/4,1-1/4,1-1/2,2-1/2 IN.;2 FACE PLATE,5-5/8,8-3/8 IN.;2 SET GEARS,METRIC TRANSPOSING,ENG.GRAD.;2 HOLDER,LATHE TOOL,TURNING,STRAIGHT,3/8 BY 7/8 IN.SHANK FOR 1/4 BY 1/4 IN.BIT,BORING,3/8 BY 7/8 IN.SHANK,COMP.W/9/16 IN.BAR AND 30,45,90 DEG.END CAPS FOR 3/16 IN.BITS,CUTTING OFF,RH,3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE
ACTUAL SWING OVER BED: (BTTF) 10.125 INCHES NOMINAL
CARRIAGE CROSS FEED OPERATION METHOD: (BTYS) HAND AND POWER
CARRIAGE LONGITUDINAL FEED OPERATION METHOD: (BTYR) HAND AND POWER
CARRIAGE QUANTITY: (BTYQ) 1
CENTER TO CENTER DISTANCE: (ADQR) 33.750 INCHES NOMINAL
CURRENT TYPE: (ACDC) AC
DESIGN TYPE: (APGF) SCREW
FREQUENCY IN HERTZ: (FREQ) 60.0
HEADSTOCK DRIVE TYPE: (BTWL) STEP CONE PULLEY, BACK GEARED
HOLE DIAMETER THROUGH SPINDLE: (BTYP) 1.375 INCHES NOMINAL
MOUNTING TYPE: (AAXX) BENCH
SPECIAL FEATURES: (FEAT) 2 HOLDER,LATHE TOOL,CUTTING OFF,STRAIGHT 3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE,TURNING,OFFSET,LH,3/8 BY 7/8 IN.SHANK,F/1/4 BY 1/4 IN.BIT;2 INDIC.,THREAD DIAL;2 KNURLING TOOL,REVOLVING HEAD,3/8 BY 7/8 BY 5-1/2 IN.SHANK,W/3 PR KNURLS DIAMOND SHAPE,FINE,MED.,COARSE 2 POST,TOOL,TO ACCOMMODATE 3/8 BY 7/8 IN.SHANK;2 REST,CPD.GRAD.,FOLLOWER,STEADY;2 SLEEVE,LATHE,H/STOCK SPINDLE;2 STOP,CARRIAGE,MICROMETER,THREAD CUTTING,ADJUSTABLE;2 SWITCH,208V,3 POS.START,STOP,REV.;2 TAPER ATTACHMENT,TELESCOPIC,LATHE
PERFORMANCE TYPE: (AGLD) STANDARD DUTY
PHASE: (FAAZ) THREE
PURPOSE FOR WHICH DESIGNED: (AKSL) GENERAL
RATED SWING: (BTTD) 10.000 INCHES NOMINAL
SPINDLE SPEED QUANTITY: (BTSZ) 12
SPINDLE SPEED RANGE IN RPM: (BTTB) +55.0 TO 1400.0
SWING OVER CROSS SLIDE: (BTTG) 5.750 INCHES NOMINAL
THREAD CHANGE QUANTITY: (BTWB) 48
THREAD QUANTITY RANGE: (BTZR) +4.0 TO 80.0 PER INCH
VOLTAGE IN VOLTS: (ELEC) 220.0 AND 440.0
SPECIAL FEATURES: (FEAT) 72 HOLDER,LATHE TOOL,CUTTING OFF,STRAIGHT 3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE,TURNING,OFFSET,LH,3/8 BY 7/8 IN.SHANK,F/1/4 BY 1/4 IN.BIT;2 INDIC.,THREAD DIAL;2 KNURLING TOOL,REVOLVING HEAD,3/8 BY 7/8 BY 5-1/2 IN.SHANK,W/3 PR KNURLS DIAMOND SHAPE,FINE,MED.,COARSE^2 POST,TOOL,TO ACCOMMODATE 3/8 BY 7/8 IN.SHANK;2 REST,CPD.GRAD.,FOLLOWER,STEADY;2 SLEEVE,LATHE,H/STOCK SPINDLE;2 STOP,CARRIAGE,MICROMETER,THREAD CUTTING,ADJUSTABLE;2 SWITCH,208V,3 POS.START,STOP,REV.;2 TAPER ATTACHMENT,TELESCOPIC,LATHE
SPINDLE SPEED RANGE IN RPM: (BTTB) +55.0/+1400.0
UNABLE TO DECODE: (BTWM) UNABLE TO DECODE
BED TYPE: (AWHA) SOLID
THREAD QUANTITY RANGE: (BTZR) +4.0/+80.0 PER INCH