ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5305-00-536-6830, 5305005366830
SCREW,CLOSE TOLERANCE

Federal Supply Classification
FSC 5305 - Screws
National Item Identification Number
NIIN 005366830
Codification Country
United States
Item Name Code
INC 29294
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(N) There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5305-00-536-6830
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5305-00-536-6830


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5305-00-536-6830

National Stock Number (NSN) 5305-00-536-6830, or NIIN 005366830, (screw,close tolerance) was assigned September 22, 1974 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 3 manufacturer part numbers associated with this NSN. 2 of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 7 different weapons systems.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) Acquisition of this part is controlled by QPL procedures. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 29294. [A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 5305005366830 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

MATERIAL
(MATT) UNABLE TO DECODE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) UNABLE TO DECODE
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) UNABLE TO DECODE
SURFACE TREATMENT
(SFTT) UNABLE TO DECODE
SURFACE FINISH
(CSYM) UNABLE TO DECODE
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER
(CRZS) FIRST HOLE INCHES MINIMUM 4.723 AND INCHES MAXIMUM 4.743
FASTENER LENGTH
(AASB) INCHES MINIMUM 4.851 AND INCHES MAXIMUM 4.871
GRIP DIAMETER
(AAUR) INCHES MINIMUM 0.3737 AND INCHES MAXIMUM 0.3742
GRIP LENGTH
(ANEE) INCHES MINIMUM 4.312 AND INCHES MAXIMUM 4.328
HEAD HEIGHT
(AASU) INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.204
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629
MATERIAL
(MATT) OVERALL STEEL COMP XM-13
NOMINAL THREAD DIAMETER
(AHYM) INCHES 0.375
SHANK UNTHREADED HOLE DIAMETER
(AAWB) FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.116
SPECIAL FEATURES
(FEAT) RETAINING ELEMENT IN SHANK
SURFACE FINISH
(CSYM) BEARING SURFACE OF HEAD MICROINCHES 32.0
SURFACE FINISH
(CSYM) GRIP MICROINCHES 32.0
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35
SURFACE TREATMENT
(SFTT) OVERALL PASSIVATE
THREAD LENGTH
(AASA) INCHES MINIMUM 0.352 AND INCHES MAXIMUM 0.403
THREAD CLASS
(AAJD) 3A
THREAD DIRECTION
(AAJF) RIGHT-HAND
THREAD QUANTITY PER INCH
(CMLP) 24
THREAD SERIES DESIGNATOR
(THSD) UNIFIED NATIONAL JOINT FINE (UNJF)
WIDTH BETWEEN FLATS
(AATB) INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564
THREAD SERIES DESIGNATOR
(THSD) UNJF

Manufacturer Part Numbers


Related Inventory



 
Top