ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5310-01-226-1969, 5310012261969
NUT,SLEEVE

Federal Supply Classification
FSC 5310 - Nuts and Washers
National Item Identification Number
NIIN 012261969
Codification Country
United States
Item Name Code
INC 29735
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(N) There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5310-01-226-1969
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5310-01-226-1969


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5310-01-226-1969

National Stock Number (NSN) 5310-01-226-1969, or NIIN 012261969, (nut,sleeve) was assigned February 13, 1986 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts. ISO Group has several sources of supply for this NSN.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Dec 13, 2013, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 29735. [AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES:NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no data in the HMIRS and the NSN is in an FSC not generally suspected of containing hazardous materials. NSN 5310012261969 does not contain precious metals.

This NSN is associated to Schedule B 7415290000: copper screws, nuts, bolts, rivets, and other fasteners not threaded. The Schedule B End Use is listed as finished metal shapes. NAICS classification category 332722: bolt, nut, screw, rivet, and washer manufacturing.

This information was last updated on .


Technical Characteristics

CROSS-SECTIONAL SHAPE
(ANLR) ROUND BOTH ENDS
FLANGE DIAMETER
(ABKK) 14.4 MILLIMETERS NOMINAL
FLANGE THICKNESS
(ABKU) 2.5 MILLIMETERS NOMINAL
MATERIAL
(MATT) COPPER ALLOY OVERALL
NOMINAL THREAD SIZE
(CQJX) 0.190 INCHES
NUT DIAMETER
(ACTD) 9.1 MILLIMETERS NOMINAL
NUT LENGTH
(ACVN) 4.0 MILLIMETERS NOMINAL
NUT STYLE
(ACTA) SLEEVE
SURFACE TREATMENT
(SFTT) CHROMIUM OVERALL
THREAD DIRECTION
(AAJF) RIGHT-HAND
THREAD CLASS
(AAJD) 2B
THREAD SERIES
(BZRR) UNC
THREAD QUANTITY PER INCH
(CMLP) 24

Manufacturer Part Numbers


Related Inventory

01-350-6847
Readily Available
01-135-068

Condition FN
13/16X15 A31 TA
Readily Available
MS51896-11B
5305013506862
Condition NE
SCREW
Readily Available
7671CNAS538B4P028
3120-01-350-6898
Condition NE
BUSHING
Readily Available
NASM51896-11B
5305013506862
Condition NS
SCREW
Readily Available
7671C13229E1000-2
5340-01-350-6801
Condition NE
STRAP
Readily Available
109414
5331013506838
Condition NS
PACKING
Readily Available
423918-1
5365013506887
Condition NS
SPACER
Readily Available
12370909-1
5365013506847
Condition NE
SPACER
Readily Available
ALS 50890 CHCCS-019-
5340 -01-350-680
STRAP,WEBBING
Readily Available
472-0970-001
5961001350686
Condition NS
TRANSISTOR
Readily Available
360678
5365013506888
Condition NS
SHIM
Readily Available


 
Top