ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5330-00-163-2997, 5330001632997
GASKET

Federal Supply Classification
FSC 5330 - Packing and Gasket Materials
National Item Identification Number
NIIN 001632997
Codification Country
United States
Item Name Code
INC 04522
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5330-00-163-2997
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5330-00-163-2997


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5330-00-163-2997

National Stock Number (NSN) 5330-00-163-2997, or NIIN 001632997, (gasket) was assigned November 12, 1971 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Mar 02, 2005, this NSN's acquisition method was noted as: Acquire only from the prime contractor although the engineering data identifies the Commercial and Government Entity Code (CAGE) and part number of a source other than the prime contractor. The rights to use the data needed to purchase this part from additional sources are not owned by the Government and cannot be purchased. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 04522. [A DEFORMABLE MATERIAL WHICH PREVENTS THE PASSAGE OF MATTER THROUGH THE JOINT FORMED WHEN TWO FACES ARE JOINED. IT MAY BE METALLIC OR NONMETALLIC, LUBRICATED OR IMPREGNATED, SOLID OR HOLLOW CROSS SECTION. IT MAY BE MADE TO ANY PREDETERMINED DIMENSION AND SHAPE. EXCLUDES:FLAT DISKS, ITEMS MADE OF FELT MATERIAL AND ITEMS HAVING JOINTS. FOR ROUND METAL AND PLASTIC ITEMS WITH AN APERTURE AND A SOLID RECTANGULAR CROSS SECTION, SEE WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; AND SPACER RING. EXCLUDES:DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; AND RING, SEALING JAR.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5330001632997 contains an unknown precious metal.

This NSN is associated to Schedule B 4001290000: natural rubber in other forms, nesoi. The Schedule B End Use is listed as agric. industry-unmanufactured. NAICS classification category 113210: forest nurseries and gathering of forest products.

This information was last updated on .


Technical Characteristics

APERTURE LENGTH
(ADUF) 8.250 INCHES NOMINAL
APERTURE WIDTH
(ADUE) 4.313 INCHES NOMINAL
BOLT HOLE QUANTITY
(AECS) 4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
(ADUZ) 8.000 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
(ADUY) 4.062 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE
(AAGR) SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS
(ADVM) 0.063 INCHES NOMINAL
HARDNESS RATING
(CQFM) 40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
HOLE DIAMETER
(AAUB) 0.250 INCHES NOMINAL
INSIDE CORNER BEVEL LENGTH ALONG LENGTH
(ADUS) 0.750 INCHES NOMINAL
INSIDE CORNER BEVEL LENGTH ALONG WIDTH
(ADUR) 0.750 INCHES NOMINAL
MATERIAL
(MATT) RUBBER CHLOROPRENE CLASS CR OVERALL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH
(ADVE) 0.375 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH
(ADVD) 0.375 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 8.750 INCHES NOMINAL
OVERALL WIDTH
(ABMK) 4.813 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) NON-CIRCULAR

Manufacturer Part Numbers


Related Inventory

1621234PC2
5305008423410
Condition NS
SCREW
Readily Available
5305-00-842-3410
Screw
Readily Available
63-423-410
Condition FN
10" SEMI-STEEL
Readily Available
154234-100
1188318
Condition NE
Loctite Stycast
Readily Available
D4234-100ML
TCI-D4234-49
Condition NE
N,N-Diethylform
Readily Available
29RR40
242.341.00.1
Condition NE
Bonnet Repair K
Readily Available
697334-23410

Condition NE
Cle-Line 1802 #
Readily Available
11683947
3120004234100
Condition NS
BEARING
Readily Available
11684032
5340004234104
Condition NE
BRACKET
Readily Available
3120-00-423-4100
004234100.3120
Condition NE
BUSHING
Readily Available
11683947
3120-00-423-4100
Desc: Bearing,
Readily Available


 
Top