ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5330-00-427-4479, 5330004274479
GASKET

Federal Supply Classification
FSC 5330 - Packing and Gasket Materials
National Item Identification Number
NIIN 004274479
Codification Country
United States
Item Name Code
INC 04522
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5330-00-427-4479
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5330-00-427-4479


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5330-00-427-4479

National Stock Number (NSN) 5330-00-427-4479, or NIIN 004274479, (gasket) was assigned May 8, 1974 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 3 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is fairly common among different weapons systems, belonging to 12 different platforms.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 12, 2013, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The data or the rights to use the data needed to purchase this part from additional sources are not owned by the Government and it has been determined that it is uneconomical to purchase them. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 04522. [A DEFORMABLE MATERIAL WHICH PREVENTS THE PASSAGE OF MATTER THROUGH THE JOINT FORMED WHEN TWO FACES ARE JOINED. IT MAY BE METALLIC OR NONMETALLIC, LUBRICATED OR IMPREGNATED, SOLID OR HOLLOW CROSS SECTION. IT MAY BE MADE TO ANY PREDETERMINED DIMENSION AND SHAPE. EXCLUDES:FLAT DISKS, ITEMS MADE OF FELT MATERIAL AND ITEMS HAVING JOINTS. FOR ROUND METAL AND PLASTIC ITEMS WITH AN APERTURE AND A SOLID RECTANGULAR CROSS SECTION, SEE WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; AND SPACER RING. EXCLUDES:DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; AND RING, SEALING JAR.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5330004274479 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

APERTURE WIDTH
(ADUE) 4.320 INCHES NOMINAL
APERTURE LENGTH
(ADUF) 10.400 INCHES NOMINAL
BOLT HOLE QUANTITY
(AECS) 8
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
(ADUZ) 3.300 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE
(AAGR) SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS
(ADVM) 0.062 INCHES NOMINAL
HARDNESS RATING
(CQFM) 50.0 SHORE DUROMETER A NOMINAL OVERALL
HOLE DIAMETER
(AAUB) 0.250 INCHES NOMINAL
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH
(ADUQ) 0.180 INCHES NOMINAL
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH
(ADUP) 0.180 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH
(ADVE) 0.840 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 11.560 INCHES NOMINAL
OVERALL WIDTH
(ABMK) 5.560 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) MIL-G-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL
(MATT) RUBBER CHLOROPRENE CLASS CR OVERALL
SPECIAL FEATURES
(FEAT) 0.310 IN. DISTANCE FROM EDGE OF GASKET TO CENTER OF BOLT HOLES
STYLE DESIGNATOR
(STYL) NON-CIRCULAR
TEMP RATING
(ABJH) -65.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT

Manufacturer Part Numbers


Related Inventory

ALS4-420-260
Condition NE
AVK RIVNUT
Readily Available
AKS4-420-260
Condition NE
INSERT
Readily Available
AKS4-420-260
5325-01-548-2516
Ring
Readily Available
ALS4-420-260B
5310-01-546-5368
Washer/Nut
Readily Available
CPR-104420-2-6
Condition NE
TUBING, VALVE A
Readily Available
AEHS-420-260
AHS4-420-260
Condition FN
HEX BODY STEEL
Request
*53891-021
AKS4-420-260
Condition FN
LOW PROFILE STE
Request
AKS4-420-260B
AKS4-420-260B
Condition FN
LOW PROFILE STE
Request
95105A147
ALS4-420-260
Condition FN
LG.FLANGE STEEL
Request
ALS4-420-260B
ALS4-420-260B
Condition FN
LG.FLANGE STEEL
Request
ALS4-420-260S
ALS4-420-260S
Condition FN
LG. FLANGE STEE
Request
AESS-420-260-530
ASS4-420-260-530
Condition FN
STEEL CAPTIVE T
Request
AESS-420-260-7175
ASS4-420-260-717
Condition FN
STEEL CAPTIVE T
Request
AESS-420-260-905
ASS4-420-260-905
Condition FN
STEEL CAPTIVE T
Request


 
Top