ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5330-00-460-0680, 5330004600680
GASKET

Federal Supply Classification
FSC 5330 - Packing and Gasket Materials
National Item Identification Number
NIIN 004600680
Codification Country
United States
Item Name Code
INC 04522
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5330-00-460-0680
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5330-00-460-0680


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5330-00-460-0680

National Stock Number (NSN) 5330-00-460-0680, or NIIN 004600680, (gasket) was assigned January 9, 1970 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 4 suppliers. Today, 3 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 3 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Nov 25, 2009, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 04522. [A DEFORMABLE MATERIAL WHICH PREVENTS THE PASSAGE OF MATTER THROUGH THE JOINT FORMED WHEN TWO FACES ARE JOINED. IT MAY BE METALLIC OR NONMETALLIC, LUBRICATED OR IMPREGNATED, SOLID OR HOLLOW CROSS SECTION. IT MAY BE MADE TO ANY PREDETERMINED DIMENSION AND SHAPE. EXCLUDES:FLAT DISKS, ITEMS MADE OF FELT MATERIAL AND ITEMS HAVING JOINTS. FOR ROUND METAL AND PLASTIC ITEMS WITH AN APERTURE AND A SOLID RECTANGULAR CROSS SECTION, SEE WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; AND SPACER RING. EXCLUDES:DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; AND RING, SEALING JAR.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5330004600680 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
(ADUY) 2.376 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
(ADUZ) 2.376 INCHES NOMINAL
CROSS-SECTIONAL THICKNESS
(ADVM) 0.040 INCHES NOMINAL
HOLE DIAMETER
(AAUB) 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
OUTSIDE CORNER RADIUS
(ADPW) 0.290 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH
(ADVE) 0.290 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH
(ADVD) 0.290 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
OVERALL LENGTH
(ABHP) 2.956 INCHES MINIMUM AND 3.016 INCHES MAXIMUM
OVERALL WIDTH
(ABMK) 2.956 INCHES MINIMUM AND 3.016 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS4544 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

Manufacturer Part Numbers

652457

RNCC
5
RNVC
2
652457

RNCC
3
RNVC
2
652457

RNCC
5
RNVC
9
652457

RNCC
5
RNVC
2

Related Inventory

07-04789
652457
Condition NE
TCM GASKET-WAST
Readily Available
652457
5330004600680
Condition NS
GASKET
Readily Available


 
Top