ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5330-00-787-0203, 5330007870203
GASKET

Federal Supply Classification
FSC 5330 - Packing and Gasket Materials
National Item Identification Number
NIIN 007870203
Codification Country
United States
Item Name Code
INC 04522
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5330-00-787-0203
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5330-00-787-0203


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5330-00-787-0203

National Stock Number (NSN) 5330-00-787-0203, or NIIN 007870203, (gasket) was assigned January 1, 1962 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Oct 26, 2019, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The data needed to produce this item from additional sources is not physically available. Valid AMCs: 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 04522. [A DEFORMABLE MATERIAL WHICH PREVENTS THE PASSAGE OF MATTER THROUGH THE JOINT FORMED WHEN TWO FACES ARE JOINED. IT MAY BE METALLIC OR NONMETALLIC, LUBRICATED OR IMPREGNATED, SOLID OR HOLLOW CROSS SECTION. IT MAY BE MADE TO ANY PREDETERMINED DIMENSION AND SHAPE. EXCLUDES:FLAT DISKS, ITEMS MADE OF FELT MATERIAL AND ITEMS HAVING JOINTS. FOR ROUND METAL AND PLASTIC ITEMS WITH AN APERTURE AND A SOLID RECTANGULAR CROSS SECTION, SEE WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; AND SPACER RING. EXCLUDES:DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; AND RING, SEALING JAR.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5330007870203 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

APERTURE DIAMETER
(ABVL) 2.065 INCHES MINIMUM AND 2.095 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
(ADUY) 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
(ADUZ) 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM
HOLE DIAMETER
(AAUB) 0.335 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
OUTSIDE CORNER RADIUS
(ADPW) 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH
(ADVE) 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH
(ADVD) 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
OVERALL LENGTH
(ABHP) 2.840 INCHES MINIMUM AND 2.920 INCHES MAXIMUM
OVERALL WIDTH
(ABMK) 2.840 INCHES MINIMUM AND 2.920 INCHES MAXIMUM
SPECIAL FEATURES
(FEAT) NOENE

Manufacturer Part Numbers


Related Inventory

11-02992
Condition NE
ARTEX G406-4 EL
Readily Available
102992-100

Condition NE
4111-N Neoprene
Readily Available
GN102992GT

Condition NE
JLG Midrail Ass
Readily Available
1029921
TN1029921
Condition NE
Tennant OEM Par
Readily Available
94052200
537-10299-264
Condition NE
Protect pipette
Readily Available
476W79
7010299299
Condition NE
Unitized Wheel:
Readily Available
08-18737
A9910299-2
Condition NE
AWI-AMI A991029
Readily Available
08-18738
A9910299-2X
Condition NE
AWI-AMI A991029
Readily Available
537AS529-2
5306010299275
Condition NS
BOLT
Readily Available
537AS529-2
5305010299275
Condition NS
BOLT
Readily Available
10863508
5640001029929
Condition NS
INSULATION SLEE
Readily Available
537AS590
3040010299257
Condition NS
SHAFT
Readily Available
171A423 PIECE 112
2825010299228
Condition NS
STUD
Readily Available
K6643225 PIECE 17
5310010299219
Condition NS
NUT
Readily Available
11619289
5330001029927
Condition NS
SEAL
Readily Available
102992
Condition NE
HARDWARE
Readily Available
7671C171A423
5307-01-029-9232
Condition NE
STUD
Readily Available


 
Top