ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5330-01-133-4427, 5330011334427
GASKET

Federal Supply Classification
FSC 5330 - Packing and Gasket Materials
National Item Identification Number
NIIN 011334427
Codification Country
United States
Item Name Code
INC 04522
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5330-01-133-4427
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5330-01-133-4427


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5330-01-133-4427

National Stock Number (NSN) 5330-01-133-4427, or NIIN 011334427, (gasket) was assigned June 15, 1982 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. 2 of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Mar 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 04522. [A DEFORMABLE MATERIAL WHICH PREVENTS THE PASSAGE OF MATTER THROUGH THE JOINT FORMED WHEN TWO FACES ARE JOINED. IT MAY BE METALLIC OR NONMETALLIC, LUBRICATED OR IMPREGNATED, SOLID OR HOLLOW CROSS SECTION. IT MAY BE MADE TO ANY PREDETERMINED DIMENSION AND SHAPE. EXCLUDES:FLAT DISKS, ITEMS MADE OF FELT MATERIAL AND ITEMS HAVING JOINTS. FOR ROUND METAL AND PLASTIC ITEMS WITH AN APERTURE AND A SOLID RECTANGULAR CROSS SECTION, SEE WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; AND SPACER RING. EXCLUDES:DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; AND RING, SEALING JAR.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5330011334427 does not contain precious metals.

This information was last updated on .


Technical Characteristics

APERTURE WIDTH
(ADUE) 5.780 INCHES NOMINAL
APERTURE LENGTH
(ADUF) 10.840 INCHES NOMINAL
BOLT HOLE QUANTITY
(AECS) 12
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
(ADUZ) 2.910 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
(ADUY) 3.730 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE
(AAGR) SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS
(ADVM) 0.060 INCHES NOMINAL
HARDNESS RATING
(CQFM) 45.0 SHORE DUROMETER A MINIMUM OVERALL AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
HOLE DIAMETER
(AAUB) 0.210 INCHES NOMINAL
INSIDE CORNER RADIUS
(ADPQ) 0.120 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH
(ADVD) 1.270 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH
(ADVE) 1.270 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 11.560 INCHES NOMINAL
OVERALL WIDTH
(ABMK) 6.500 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) ZZ-R-765 CL 2 GR 50 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL
(MATT) RUBBER SILICONE CLASS Q OVERALL

Manufacturer Part Numbers


Related Inventory

770680-1
Condition FN
23 POS AMP SEAL
Readily Available
57-068-010
302114510
Condition FN
5mm X 0.80mm 6H
Readily Available
57-068-012
302117510
Condition FN
6mm X 1.00mm 6H
Readily Available
57-068-013
302119010
Condition FN
7mm X 1.00mm 6H
Readily Available
57-068-014
302120510
Condition FN
8mm X 1.25mm 6H
Readily Available
57-068-015
302125510
Condition FN
10mm X 1.50mm 6
Readily Available
57-068-016
302124510
Condition FN
10mm X 1.25mm 6
Readily Available
57-068-018
302130510
Condition FN
12mm X 1.75mm 6
Readily Available
07-06801
630989
Condition NE
TCM SHAFT-ALTER
Readily Available
8706801G01
Stiffener, Long
Readily Available
8706801G03
Stiffener, Shor
Readily Available
8706801H05
Stiffener, Late
Readily Available
39-11706-801
5340007990243
Condition NS
BRACKET
Readily Available
54-70-6801
5330008651664
Condition NS
RUBBER SHEET
Readily Available
000-270-6801
4320011761420
Condition NS
PARTS KIT
Readily Available
3770680-1
3770680U1
Condition FN
Desc: SUPPORT;
Readily Available
73807.068.01
Condition FN
O - RING
Readily Available
17107.068.01
Condition FN
ADAPTOR
Readily Available
91089-991
5995-01-170-6801
Request
5428-706-80-10
INTERSTAGE TURB
Request


 
Top