ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-013-3447, 5340000133447
STRAP,RETAINING

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 000133447
Codification Country
United States
Item Name Code
INC 05072
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-013-3447
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-013-3447


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-013-3447

National Stock Number (NSN) 5340-00-013-3447, or NIIN 000133447, (strap,retaining) was assigned January 1, 1961 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 05072. [A PREFORMED ITEM OF RIGID OR SEMIRIGID MATERIAL DESIGNED TO PARTIALLY SURROUND OTHER ITEMS SUCH AS CABLE(S), CONDUIT(S), PIPE(S), TUBE(S), OR ROD(S) OR TO COMPLETELY SURROUND THEM BY MEANS OF A BRIDGE STRAP(S) (WHICH DOES NOT TIGHTLY CLAMP AGAINST THE COMPLETE PERIPHERY). IT IS DESIGNED TO RETAIN AND/OR POSITION THE ITEMS CLOSE TO A STRUCTURE. IT MAY BE FASTENED TO THE STRUCTURE ON ONE END, BOTH ENDS, OR IN THE CENTER. SEE ALSO CLAMP, LOOP. EXCLUDES:BRACKET, PIPE; STRAP, LEATHER AND STRAP, WEBBING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340000133447 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

CUSHIONING MATERIAL
(ALTD) TEFLON IMPREGNATED ASBESTOS REINFORCED WITH WIRE
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE
(BYMR) 0.780 INCHES NOMINAL
CUSHION
(BXQG) INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH
(BYMM) 0.505 INCHES NOMINAL
DISTANCE BETWEEN MOUNTING HOLE CENTERS
(AFQM) 1.780 INCHES NOMINAL
INSIDE DIAMETER/ARCH LENGTH
(BYMP) 0.780 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 3.790 INCHES MINIMUM AND 3.830 INCHES MAXIMUM
OVERALL WIDTH
(ABMK) 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
MATERIAL THICKNESS
(ABPX) 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
MATERIAL
(MATT) STEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED
MOUNTING HOLE SIZE
(BYML) 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM
MOUNTING PAD
(BXQJ) NOT INCLUDED
SPECIAL FEATURES
(FEAT) POLYTETRAFLUOROETHYLENE IMPREGNATED ASBESTOS REINFORCED WITH WIRE
STYLE DESIGNATOR
(STYL) DOUBLE ARCH
MATERIAL
(MATT) STEEL COMP 321
MATERIAL
(MATL) STEEL, AMS 5510
UNABLE TO DECODE
(MATL) UNABLE TO DECODE

Manufacturer Part Numbers


Related Inventory



 
Top