ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-019-9334, 5340000199334
BRACKET,ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 000199334
Codification Country
United States
Item Name Code
INC 16900
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-019-9334
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-019-9334


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-019-9334

National Stock Number (NSN) 5340-00-019-9334, or NIIN 000199334, (bracket,angle) was assigned October 17, 1972 in the Federal Logistics Information System (FLIS). NIIN 000199334 was cancelled on April 2, 2015, with a cancelled status of "Item is Cancelled WITHOUT Replacement." There is no known replacement specified for this stock number. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Dec 01, 2020, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 16900. [A RIDGE ITEM, USUALLY OF FLAT MATERIAL, FORMED INTO A DIHEDRAL ANGLE (GENERALLY A RIGHT ANGLE) WHICH MAY BE REINFORCED; IT IS DESIGNED TO POSITION, ALIGN, OR SUPPORT AN ITEM(S) IN RELATION TO ANOTHER. EXCLUDES:BRACE (AS MODIFIED); BRACKET (1), MOUNTING; AND BRACKET, SHELF.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340000199334 does not contain precious metals.

This information was last updated on .


Technical Characteristics

FABRICATION METHOD (NON-CORE)
(AARN) MOLDED
UNABLE TO DECODE
(ADLL) UNABLE TO DECODE
UNABLE TO DECODE
(AHPW) UNABLE TO DECODE
UNABLE TO DECODE
(AHQN) UNABLE TO DECODE
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.159 INCHES NOMINAL
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
UNABLE TO DECODE
(FEAT) UNABLE TO DECODE
SECOND LEG LENGTH
(ADLL) 0.630 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.124 INCHES NOMINAL
SECOND LEG THICKNESS
(AHPX) 0.260 INCHES NOMINAL
UNABLE TO DECODE
(AHRA) UNABLE TO DECODE
UNIT OF ISSUE WEIGHT (NON-CORE)
(SUWT) 0.0500 POUNDS
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) TWO HOLES
UNABLE TO DECODE
(SUCB) UNABLE TO DECODE
FIRST LEG STYLE
(AJZU) SQUARE
UNABLE TO DECODE
(AARN) UNABLE TO DECODE
UNABLE TO DECODE
(ACHY) UNABLE TO DECODE
UNABLE TO DECODE
(ADLK) UNABLE TO DECODE
UNABLE TO DECODE
(AHLF) UNABLE TO DECODE
FIRST LEG WIDTH
(AHQN) 1.000 INCHES NOMINAL
UNABLE TO DECODE
(AKAU) UNABLE TO DECODE
FIRST LEG LENGTH
(ADLK) 0.592 INCHES NOMINAL
FIRST LEG THICKNESS
(AHPW) 0.195 INCHES NOMINAL
SPECIAL FEATURES
(FEAT) W/ONE 0.109 IN. DIA POSITIONING HOLE AT BOTTOM OF FIRST LEG
UNABLE TO DECODE
(STYL) UNABLE TO DECODE
UNABLE TO DECODE
(AHLN) UNABLE TO DECODE
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHQU) 0.682 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) ONE HOLE
UNABLE TO DECODE
(AKCU) UNABLE TO DECODE
STYLE DESIGNATOR
(STYL) ANGLE
SECOND LEG HOLE DIAMETER
(AHLN) 0.138 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.124 INCHES NOMINAL
UNABLE TO DECODE
(AHLV) UNABLE TO DECODE
UNABLE TO DECODE
(AHPX) UNABLE TO DECODE
UNABLE TO DECODE
(AHQU) UNABLE TO DECODE
SECOND LEG STYLE
(AKBU) SQUARE
FIRST LEG HOLE DIAMETER
(AHLK) 0.138 INCHES NOMINAL
UNABLE TO DECODE
(AHLK) UNABLE TO DECODE
UNABLE TO DECODE
(AHLW) UNABLE TO DECODE
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.154 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) IDENTICAL
UNABLE TO DECODE
(CSSP) UNABLE TO DECODE
UNABLE TO DECODE
(MATT) UNABLE TO DECODE
SECOND LEG WIDTH
(AHLF) 0.372 INCHES NOMINAL
UNABLE TO DECODE
(AHRB) UNABLE TO DECODE
UNABLE TO DECODE
(AKBU) UNABLE TO DECODE
UNIT OF ISSUE CUBE (NON-CORE)
(SUCB) 0.0006 CUBIC FEET
UNABLE TO DECODE
(CSSQ) UNABLE TO DECODE
MATERIAL
(MATT) PLASTIC
MOUNTING HOLE TYPE
(ACHY) THREADED
UNABLE TO DECODE
(AJZU) UNABLE TO DECODE

Manufacturer Part Numbers


Related Inventory



 
Top