ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-021-1990, 5340000211990
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 000211990
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-021-1990
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-021-1990


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-021-1990

National Stock Number (NSN) 5340-00-021-1990, or NIIN 000211990, (bracket,double angle) was assigned January 1, 1963 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340000211990 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) INCHES NOMINAL 9.310
CENTER SECTION THICKNESS
(AHQB) INCHES NOMINAL 0.250
CENTER SECTION WIDTH
(AHQA) INCHES NOMINAL 9.000
FIRST LEG ANGLE
(CSSQ) DEGREES NOMINAL 90.0
FIRST LEG LENGTH
(ADLK) INCHES NOMINAL 2.000
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHQU) INCHES NOMINAL 6.990
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) INCHES NOMINAL 0.075
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) INCHES NOMINAL 1.030
FIRST LEG SLOT LENGTH
(AHLL) INCHES NOMINAL 0.820
FIRST LEG SLOT WIDTH
(AHLM) INCHES NOMINAL 0.530
FIRST LEG THICKNESS
(AHPW) INCHES NOMINAL 0.250
FIRST LEG WIDTH
(AHQN) INCHES NOMINAL 9.000
MATERIAL
(MATT) STEEL
SECOND LEG ANGLE
(CSSR) DEGREES NOMINAL 90.0
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH
(AHLS) INCHES MINIMUM 0.870 AND INCHES MAXIMUM 0.890
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHLP) INCHES MINIMUM 6.430 AND INCHES MAXIMUM 6.450
SECOND LEG HOLE DIAMETER
(AHLN) INCHES MINIMUM 0.464 AND INCHES MAXIMUM 0.484
SECOND LEG LENGTH
(ADLL) INCHES NOMINAL 2.940
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) INCHES NOMINAL 0.940
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) INCHES NOMINAL 1.000
SECOND LEG THICKNESS
(AHPX) INCHES NOMINAL 0.250
SECOND LEG WIDTH
(AHLF) INCHES NOMINAL 9.000
SPECIAL FEATURES
(FEAT) SECOND SLOT ON FIRST LEG HOLE ARRANGEMENT STYLE WITH SAME DIMENSIONSAS OPPOSITE SIDE
SURFACE TREATMENT
(SFTT) PAINT

Manufacturer Part Numbers


Related Inventory



 
Top