ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-036-0380, 5340000360380
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 000360380
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-036-0380
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-036-0380


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-036-0380

National Stock Number (NSN) 5340-00-036-0380, or NIIN 000360380, (bracket,double angle) was assigned November 8, 1972 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Dec 17, 2013, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340000360380 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 2.250 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.125 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 14.843 INCHES MINIMUM AND 14.873 INCHES MAXIMUM
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG HOLE DIAMETER
(AHLK) 0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
FIRST LEG THICKNESS
(AHPW) 0.125 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 14.843 INCHES MINIMUM AND 14.873 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 1.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-A-200/11,T6511 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) ALUMINUM ALLOY 7075
MOUNTING HOLE TYPE
(ACHY) COUNTERSUNK AND PLAIN
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG LENGTH
(ADLL) 1.000 INCHES NOMINAL
SECOND LEG THICKNESS
(AHPX) 0.125 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) IDENTICAL
SPECIAL FEATURES
(FEAT) FIRST AND SECOND LEGS HAVE ADDITONAL HOLES,0.046 IN. MIN AND 0.051 IN. MAX DIA EACH LEG AND 0.125 IN. MIN AND 0.155 IN. MAX DIA EACH LEG; CENTER LEG HAS 2 HOLES 0.220 IN. MIN AND 0.226 IN.MAX DIA; ITEM HAS A PAD GLUED ON CENTER SECTION
STYLE DESIGNATOR
(STYL) ADJACENT ANGLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) MIL-STD-171,FINISH 21.19 MIL STD ALL TREATMENT RESPONSES
SURFACE TREATMENT
(SFTT) PRIMER AND ENAMEL SYNTHETIC LUSTERLESS

Manufacturer Part Numbers


Related Inventory



 
Top