ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-075-4903, 5340000754903
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 000754903
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-075-4903
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-075-4903


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-075-4903

National Stock Number (NSN) 5340-00-075-4903, or NIIN 000754903, (bracket,double angle) was assigned January 1, 1963 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 3 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340000754903 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

FABRICATION METHOD (NON-CORE)
(AARN) STAMPED
CENTER SECTION THICKNESS
(AHQB) 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FABRICATION METHOD
(AARN) STAMPED
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
FIRST LEG CORNER RADIUS
(AHQP) 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHQU) 1.700 INCHES NOMINAL
FIRST LEG STYLE
(AJZU) CORNER RADIUS
FIRST LEG THICKNESS
(AHPW) 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) TWO HOLES
FIRST LEG HOLE DIAMETER
(AHLK) 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 0.709 INCHES MINIMUM AND 0.791 INCHES MAXIMUM
FIRST LEG WIDTH
(AHQN) 1.919 INCHES MINIMUM AND 1.981 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS2400 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL
MOUNTING HOLE TYPE
(ACHY) PLAIN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
SECOND LEG LENGTH
(ADLL) 0.709 INCHES MINIMUM AND 0.791 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
SECOND LEG END RADIUS
(AJFQ) 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) ONE HOLE
SECOND LEG HOLE DIAMETER
(AHLN) 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) END RADIUS AND TAPERED
SECOND LEG THICKNESS
(AHPX) 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) CADMIUM

Manufacturer Part Numbers


Related Inventory

G912487996
99238
Condition NE
10-75 PSI Polis
Readily Available


 
Top