ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-089-0292, 5340000890292
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 000890292
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-089-0292
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-089-0292


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-089-0292

National Stock Number (NSN) 5340-00-089-0292, or NIIN 000890292, (bracket,double angle) was assigned March 18, 1972 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340000890292 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

FABRICATION METHOD (NON-CORE)
(AARN) FORMED
CENTER SECTION WIDTH
(AHQA) 4.475 INCHES MINIMUM AND 4.515 INCHES MAXIMUM
CENTER SECTION HEIGHT
(AHPZ) 2.693 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
FABRICATION METHOD
(AARN) FORMED
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.250 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.250 INCHES NOMINAL
FIRST LEG END RADIUS
(AJFP) 0.250 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) TWO HOLES
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHQU) 4.016 INCHES NOMINAL
FIRST LEG STYLE
(AJZU) END RADIUS
FIRST LEG THICKNESS
(AHPW) 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
FIRST LEG HOLE DIAMETER
(AHLK) 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 0.970 INCHES MINIMUM AND 0.990 INCHES MAXIMUM
FIRST LEG WIDTH
(AHQN) 4.516 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 410
MOUNTING HOLE TYPE
(ACHY) PLAIN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.312 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.312 INCHES NOMINAL
SECOND LEG ANGLE
(CSSR) 146.0 DEGREES NOMINAL
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH
(AHLS) 2.345 INCHES NOMINAL
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHLP) 0.673 INCHES NOMINAL
SECOND LEG LENGTH
(ADLL) 2.890 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) END RADIUS AND TAPERED
SECOND LEG THICKNESS
(AHPX) 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
SECOND LEG END RADIUS
(AJFQ) 0.312 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) TWO HOLES
SECOND LEG HOLE DIAMETER
(AHLN) 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
SECOND LEG WIDTH
(AHLF) 4.516 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH
(AHLS) 2.345 NOMINAL INCHES
UNABLE TO DECODE
(AARN) UNABLE TO DECODE

Manufacturer Part Numbers


Related Inventory

1117150340
PART
Readily Available
4291305-01
2590-01-571-5034
Request


 
Top