ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-116-6322, 5340001166322
Cancelled -> Replaced by 5340004209432

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 001166322
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-116-6322
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-116-6322


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-116-6322

National Stock Number (NSN) 5340-00-116-6322, or NIIN 001166322, (bracket,double angle) was assigned September 30, 1968 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN replaces 1 stock number, 5340004209432.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 25, 2008, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340001166322 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

FABRICATION METHOD (NON-CORE)
(AARN) FORMED
CENTER SECTION THICKNESS
(AHQB) 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
CENTER SECTION WIDTH
(AHQA) 1.080 INCHES NOMINAL
FABRICATION METHOD
(AARN) FORMED
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM
FIRST LEG ANGLE
(CSSQ) 120.0 DEGREES NOMINAL
FIRST LEG CORNER RADIUS
(AHQP) 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
FIRST LEG SLOT LENGTH
(AHLL) 0.640 INCHES MINIMUM AND 0.680 INCHES MAXIMUM
FIRST LEG SLOT WIDTH
(AHLM) 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
FIRST LEG STYLE
(AJZU) CORNER RADIUS
FIRST LEG THICKNESS
(AHPW) 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE SLOT
FIRST LEG LENGTH
(ADLK) 0.633 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 1.080 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 321
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.430 INCHES MINIMUM AND 0.460 INCHES MAXIMUM
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG LENGTH
(ADLL) 0.960 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
SECOND LEG END WIDTH
(AHLH) 0.560 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) ONE SLOT
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG SLOT LENGTH
(AHLZ) 0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM
SECOND LEG SLOT WIDTH
(AHMA) 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
SECOND LEG STYLE
(AKBU) ANGLE
SECOND LEG THICKNESS
(AHPX) 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE

Manufacturer Part Numbers


Related Inventory



 
Top