ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-127-4076, 5340001274076
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 001274076
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-127-4076
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-127-4076


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-127-4076

National Stock Number (NSN) 5340-00-127-4076, or NIIN 001274076, (bracket,double angle) was assigned March 15, 1975 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 3 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Oct 01, 2010, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340001274076 does not contain precious metals.

This information was last updated on .


Technical Characteristics

REINFORCEMENT METHOD (NON-CORE)
(AFPW) TURNED EDGE BOTH ENDS
CENTER SECTION HEIGHT
(AHPZ) 0.900 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
CENTER SECTION THICKNESS
(AHQB) 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM
CENTER SECTION WIDTH
(AHQA) 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
FABRICATION METHOD
(AARN) STAMPED
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.250 INCHES NOMINAL
FIRST LEG END RADIUS
(AJFP) 0.350 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE HOLE
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
FIRST LEG STYLE
(AJZU) END RADIUS
FIRST LEG THICKNESS
(AHPW) 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
FIRST LEG WIDTH
(AHQN) 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
FIRST LEG HOLE DIAMETER
(AHLK) 0.280 INCHES MINIMUM AND 0.285 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 321
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.250 INCHES NOMINAL
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG LENGTH
(ADLL) 2.352 INCHES MINIMUM AND 2.400 INCHES MAXIMUM
SECOND LEG STYLE
(AKBU) END RADIUS
SECOND LEG THICKNESS
(AHPX) 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM
SECOND LEG END RADIUS
(AJFQ) 0.350 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) ONE HOLE
SECOND LEG HOLE DIAMETER
(AHLN) 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
SECOND LEG WIDTH
(AHLF) 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
REINFORCEMENT METHOD
(AFPW) TURNED EDGE
SPECIAL FEATURES
(FEAT) MOUNTING PAD ON SHORT LEG
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE
FABRICATION METHOD (NON-CORE)
(AARN) STAMPED

Manufacturer Part Numbers


Related Inventory



 
Top