ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-147-9121, 5340001479121
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 001479121
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-147-9121
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-147-9121


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-147-9121

National Stock Number (NSN) 5340-00-147-9121, or NIIN 001479121, (bracket,double angle) was assigned September 22, 1971 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 4 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Dec 17, 2013, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340001479121 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

CENTER SECTION THICKNESS
(AHQB) 0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
CENTER SECTION WIDTH
(AHQA) 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE HOLE
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG THICKNESS
(AHPW) 0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
FIRST LEG WIDTH
(AHQN) 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
FIRST LEG HOLE DIAMETER
(AHLK) 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 0.640 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 410
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) IDENTICAL
SECOND LEG THICKNESS
(AHPX) 0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE

Manufacturer Part Numbers

665344

RNCC
C
RNVC
1
665344

RNCC
5
RNVC
9
665344

RNCC
3
RNVC
2
665344

RNCC
5
RNVC
2

Related Inventory

665344
5340001479121
Condition NS
BRACKET RETAINI
Readily Available


 
Top