ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-172-4304, 5340001724304
RETAINER,HELICAL COMPRESSION SPR

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 001724304
Codification Country
United States
Item Name Code
INC 24327
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-172-4304
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-172-4304


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-172-4304

National Stock Number (NSN) 5340-00-172-4304, or NIIN 001724304, (retainer,helical compression spr) was assigned September 1, 1972 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Dec 17, 2013, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The data or the rights to use the data needed to purchase this part from additional sources are not owned by the Government and it has been determined that it is uneconomical to purchase them. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 24327. [A CYLINDRICAL ITEM SPECIFICALLY DESIGNED TO FIT OVER THE END OF AND COMPLETELY ENCASE THE SPRING. THE OPEN END IS USUALLY FLANGED; THE OPPOSITE END MAY BE CLOSED OR HAVE AN ORIFICE TO ACCOMMODATE A GUIDE, PLUNGER, OR THE LIKE. IT IS USED TO POSITION THE SPRING AND RESTRAIN LATERAL MOTION. IT MAY PROVIDE A SEAT FOR THE SPRING. EXCLUDES:HOLDER,SPRING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340001724304 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

SURFACE TREATMENT
(SURF) PASSIVATED,WK520002 33525
END HOLE DIAMETER
(BWRC) 0.620 INCHES NOMINAL
BODY INSIDE DIAMETER
(ADAS) 0.997 INCHES MINIMUM AND 1.003 INCHES MAXIMUM
BODY OUTSIDE DIAMETER
(ADAR) 1.035 INCHES MINIMUM AND 1.041 INCHES MAXIMUM
BOLT CIRCLE DIAMETER
(ABKG) 1.750 INCHES NOMINAL
CASEHARDENING INDICATOR
(AASG) NOT CASEHARDENED
FLANGE DIAMETER
(ABKK) 2.130 INCHES NOMINAL
FLANGE THICKNESS
(ABKU) 0.019 INCHES NOMINAL
LIP THICKNESS
(CDKF) 0.019 INCHES NOMINAL
OVERALL HEIGHT
(ABKW) 0.375 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-S-766, CLASS 321 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 321
MOUNTING HOLE DIAMETER
(ABTB) 0.220 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) PARALLEL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) WK520002 33525 MFR REF SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) PASSIVATE
MOUNTING HOLE DIAMETER
(ABTB) 0.220 NOMINAL INCHES
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
UNABLE TO DECODE
(SURF) UNABLE TO DECODE
MATERIAL
(MATL) STEEL, QQ-S-766, CLASS 321

Manufacturer Part Numbers


Related Inventory

G9276906
1301500701
Condition NE
Spiral Flute Ta
Readily Available
MS27690-6
5340002234179
Condition NS
HINGE
Readily Available


 
Top