ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-178-6593, 5340001786593
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 001786593
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-178-6593
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-178-6593


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-178-6593

National Stock Number (NSN) 5340-00-178-6593, or NIIN 001786593, (bracket,double angle) was assigned April 7, 1969 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340001786593 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 3.020 INCHES MINIMUM AND 3.080 INCHES MAXIMUM
CENTER SECTION THICKNESS
(AHQB) 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
CENTER SECTION WIDTH
(AHQA) 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHQU) 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG THICKNESS
(AHPW) 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) TWO HOLES
FIRST LEG HOLE DIAMETER
(AHLK) 0.208 INCHES MINIMUM AND 0.214 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 0.740 INCHES MINIMUM AND 0.800 INCHES MAXIMUM
FIRST LEG WIDTH
(AHQN) 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-A-250/11,0 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) ALUMINUM ALLOY 6061
MOUNTING HOLE TYPE
(ACHY) COUNTERSUNK
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH
(AHLU) 0.372 INCHES MINIMUM AND 0.392 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.780 INCHES MINIMUM AND 0.840 INCHES MAXIMUM
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH
(AHLT) 0.372 INCHES MINIMUM AND 0.392 INCHES MAXIMUM
SECOND LEG LENGTH
(ADLL) 1.680 INCHES MINIMUM AND 1.740 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 1.078 INCHES MINIMUM AND 1.158 INCHES MAXIMUM
SECOND LEG HOLE DIAMETER
(AHLN) 0.146 INCHES MINIMUM AND 0.176 INCHES MAXIMUM
SECOND LEG STYLE
(AKBU) SQUARE
SECOND LEG THICKNESS
(AHPX) 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
SECOND LEG WIDTH
(AHLF) 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM
SPECIAL FEATURES
(FEAT) CENTER HOLE 0.483 IN. MIN,0.490 IN. MAX DIA
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE
SURFACE TREATMENT
(SFTT) ANODIZE

Manufacturer Part Numbers


Related Inventory

7671C209-075-275-001
5340-00-178-6593
Condition NE
BRACKET,DOUBLE
Readily Available


 
Top