ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-182-9780, 5340001829780
BRACKET,ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 001829780
Codification Country
United States
Item Name Code
INC 16900
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-182-9780
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-182-9780


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-182-9780

National Stock Number (NSN) 5340-00-182-9780, or NIIN 001829780, (bracket,angle) was assigned May 22, 1970 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 25, 2008, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 16900. [A RIDGE ITEM, USUALLY OF FLAT MATERIAL, FORMED INTO A DIHEDRAL ANGLE (GENERALLY A RIGHT ANGLE) WHICH MAY BE REINFORCED; IT IS DESIGNED TO POSITION, ALIGN, OR SUPPORT AN ITEM(S) IN RELATION TO ANOTHER. EXCLUDES:BRACE (AS MODIFIED); BRACKET (1), MOUNTING; AND BRACKET, SHELF.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340001829780 does not contain precious metals.

This NSN is associated to Schedule B 8302500000: hat-racks, hat pegs, brackets and similar fixtures, and parts thereof, of base metal. The Schedule B End Use is listed as cell phones and other household goods, n.e.c.. NAICS classification category 337127: institutional furniture manufacturing.

This information was last updated on .


Technical Characteristics

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE HOLE
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG CORNER RADIUS
(AHQP) 0.219 INCHES NOMINAL
FIRST LEG STYLE
(AJZU) CORNER RADIUS
FIRST LEG THICKNESS
(AHPW) 0.040 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
FIRST LEG HOLE DIAMETER
(AHLK) 0.218 INCHES MINIMUM AND 0.224 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 0.625 INCHES MINIMUM AND 0.745 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 301
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.150 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
SECOND LEG CORNER RADIUS
(AHLG) 0.219 INCHES NOMINAL
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHLP) 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) CORNER RADIUS
SECOND LEG THICKNESS
(AHPX) 0.040 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) TWO HOLES
SECOND LEG HOLE DIAMETER
(AHLN) 0.135 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
SECOND LEG LENGTH
(ADLL) 0.625 INCHES MINIMUM AND 0.745 INCHES MAXIMUM
SECOND LEG WIDTH
(AHLF) 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
SPECIAL FEATURES
(FEAT) OPTIONAL 4 CORNERS CHAMFERED 0.220 IN. MIN 0.280 IN. MAX BY 40 DEGREE MIN 50 DEGREE MAX
STYLE DESIGNATOR
(STYL) ANGLE

Manufacturer Part Numbers


Related Inventory



 
Top