ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-304-7986, 5340003047986
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 003047986
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: We have 1 qualified suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-304-7986
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-304-7986


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-304-7986

National Stock Number (NSN) 5340-00-304-7986, or NIIN 003047986, (bracket,double angle) was assigned October 17, 1973 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 5 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 25, 2008, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340003047986 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 0.203 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.025 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 0.312 INCHES NOMINAL
FIRST LEG ANGLE
(CSSQ) 95.0 DEGREES NOMINAL
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG THICKNESS
(AHPW) 0.025 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 0.312 INCHES NOMINAL
FIRST LEG LENGTH
(ADLK) 0.150 INCHES NOMINAL
SECOND LEG ANGLE
(CSSR) 95.0 DEGREES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) ONE HOLE
SECOND LEG HOLE DIAMETER
(AHLN) 0.120 INCHES NOMINAL
SECOND LEG LENGTH
(ADLL) 0.306 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.140 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.156 INCHES NOMINAL
SECOND LEG WIDTH
(AHLF) 0.312 INCHES NOMINAL
SECOND LEG STYLE
(AKBU) SQUARE
SECOND LEG THICKNESS
(AHPX) 0.025 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE

Manufacturer Part Numbers


Related Inventory

1259146
TN1259146
Condition NE
Tennant OEM Par
Readily Available
49LK89
141259140
Condition NE
Class X No-Go P
Readily Available
47125914

Condition NE
Case Constructi
Readily Available
12591464
5320013407476
Condition NS
RIVET
Readily Available
12591470
Condition NE
Readily Available
G1259-14D
Readily Available
12591480
5305013423831
Condition NE
SCREW
Readily Available
12591426
4730013445729
Condition NS
FITTING
Readily Available
12591453
3120013426677
Condition NS
BUSHING
Readily Available
12591-4
5340003047986
Condition NE
BRACKET
Readily Available
12591423
5315013423783
Condition NS
PIN
Readily Available
12591470
5305013414687
Condition NS
SETSCREW
Readily Available
12591425
5360013423852
Condition NS
SPRING
Readily Available
12591496
5360013440417
Condition NS
SPRING
Readily Available
12591456
3120013426676
Condition NS
BUSHING
Readily Available
NSN 5320-01-340-7476
12591464
Condition FN
90DEG.CTSK BRAS
Request


 
Top