ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-486-3011, 5340004863011
HINGE,BUTT

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 004863011
Codification Country
United States
Item Name Code
INC 22894
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-486-3011
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-486-3011


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-486-3011

National Stock Number (NSN) 5340-00-486-3011, or NIIN 004863011, (hinge,butt) was assigned May 28, 1969 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 22894. [A HINGE USUALLY WITH RECTANGULARLY SHAPED LEAVES. THE DIMENSION PARALLEL TO THE HINGE PIN MUST BE GREATER THAN THE DIMENSION TRANSVERSE TO THE HINGE PIN. IT MAY HAVE A TENSION COIL SPRING AT ITS PIVOT(S) FOR CLOSING ACTION, AND MAY HAVE A THIRD MEMBER BETWEEN ITS PIVOT(S) TO PERMIT THE DOOR, OR THE LIKE, TO SWING IN AN ARC FROM EITHER SIDE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340004863011 does not contain precious metals.

This information was last updated on .


Technical Characteristics

MATERIAL AND LOCATION
(ANNQ) ALUMINUM ALLOY BODY
SURFACE TREATMENT AND LOCATION
(ANNR) ANODIZED, MIL-A-8625, TYPE 1, CLASS 1 BODY AND CADMIUM PIN
MATERIAL
(MATT) STEEL COMP 302 SPRING
SURFACE TREATMENT
(SFTT) ANODIZE BODY
MATERIAL AND LOCATION
(ANNQ) STEEL PIN ERR-100 ERR-100
UNABLE TO DECODE
(ANNR) UNABLE TO DECODE AND UNABLE TO DECODE
MATERIAL
(MATT) ALUMINUM ALLOY BODY
SURFACE TREATMENT
(SFTT) CADMIUM PIN
MATERIAL AND LOCATION
(ANNQ) STEEL PIN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) MIL-A-8625, TYPE 1, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE BODY
BODY WIDTH
(ADAT) 3.000 INCHES NOMINAL
KNUCKLE QUANTITY
(AKEX) 2
KNUCKLE TYPE
(AKNB) FRICTION
MATERIAL THICKNESS
(ABPX) 0.032 INCHES NOMINAL
PERFORMANCE TYPE
(AGLD) NOT RATED
PIN CENTER TO BODY EDGE DISTANCE
(AKFK) 1.000 INCHES NOMINAL
PIN REMOVABILITY
(AKES) NONREMOVABLE
MATERIAL
(MATT) UNABLE TO DECODE
MOUNTING HOLE DIAMETER
(ABTB) 0.180 INCHES NOMINAL
MOUNTING HOLE QUANTITY
(ABTJ) 3
REVERSIBLE FEATURE
(AJNC) NOT INCLUDED
SPECIAL FEATURES
(FEAT) WITH TWO SPRING ACTUATED PINS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) UNABLE TO DECODE
SURFACE TREATMENT
(SFTT) UNABLE TO DECODE
UNABLE TO DECODE
(ANNQ) UNABLE TO DECODE
MATERIAL
(MATT) STEEL PIN
MATERIAL AND LOCATION
(ANNQ) STEEL, CORROSION RESISTING, AISI 302 SPRING

Manufacturer Part Numbers


Related Inventory



 
Top