ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-491-1623, 5340004911623
HINGE,BUTT

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 004911623
Codification Country
United States
Item Name Code
INC 22894
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-491-1623
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-491-1623


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-491-1623

National Stock Number (NSN) 5340-00-491-1623, or NIIN 004911623, (hinge,butt) was assigned September 26, 1969 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Jun 02, 2006, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 22894. [A HINGE USUALLY WITH RECTANGULARLY SHAPED LEAVES. THE DIMENSION PARALLEL TO THE HINGE PIN MUST BE GREATER THAN THE DIMENSION TRANSVERSE TO THE HINGE PIN. IT MAY HAVE A TENSION COIL SPRING AT ITS PIVOT(S) FOR CLOSING ACTION, AND MAY HAVE A THIRD MEMBER BETWEEN ITS PIVOT(S) TO PERMIT THE DOOR, OR THE LIKE, TO SWING IN AN ARC FROM EITHER SIDE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340004911623 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

BODY WIDTH
(ADAT) 1.875 INCHES NOMINAL
KNUCKLE TYPE
(AKNB) FRICTION
MATERIAL THICKNESS
(ABPX) 0.040 INCHES NOMINAL
PERFORMANCE TYPE
(AGLD) NOT RATED
PIN REMOVABILITY
(AKES) NONREMOVABLE
MOUNTING HOLE DIAMETER
(ABTB) 0.128 INCHES NOMINAL
REVERSIBLE FEATURE
(AJNC) NOT INCLUDED
SPECIAL FEATURES
(FEAT) MATERIAL AND LOCATION = STEEL,FED STD 66,COMP 302,316,321 OR 416, PIN AND STEEL, MIL-W-6101, SPRING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) UNABLE TO DECODE
SURFACE TREATMENT
(SFTT) UNABLE TO DECODE
SURFACE TREATMENT
(SFTT) ANODIZE BODY
SURFACE TREATMENT
(SFTT) CADMIUM SPRING
MATERIAL
(MATT) ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 BODY
REVERSIBLE FEATURE
(AJNC) NOT INCLUDEDNOT INCLUDEDNOT INCLUDEDNOT INCLUDEDNOT INCLUDEDNOT INCLUDED
UNABLE TO DECODE
(ANNR) UNABLE TO DECODE AND UNABLE TO DECODE
PIN REMOVABILITY
(AKES) NONREMOVABLENONREMOVABLENONREMOVABLENONREMOVABLENONREMOVABLENONREMOVABLE
SPECIAL FEATURES
(FEAT) 2ND MATERIAL AND LOCATION = STEEL,FED STD 66,COMP 302,316,321 OR 416 PIN, 3RD MATERIAL AND LOCATION = STEEL,MIL-W-6101 SPRINGMATERIAL AND LOCATION = STEEL,FED STD 66,COMP 302,316,321 OR 416, PIN AND STEEL, MIL-W-6101, SPRINGSECOND MATERIAL AND LOCATION = STEEL,FED STD 66,COMP 302,316,321 OR 416 PIN, THIRD MATERIAL AND LOCATION = STEEL,MIL-W-6101 SPRING
KNUCKLE TYPE
(AKNB) FRICTIONFRICTIONFRICTIONFRICTIONFRICTIONFRICTION
SURFACE TREATMENT AND LOCATION
(ANNR) ANODIZED, MIL-A-8625, TYPE 1 BODY AND CADMIUM, QQ-P-416, TYPE 2, CLASS 2 SPRING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) MIL-A-8625, TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE SPRING
PERFORMANCE TYPE
(AGLD) NOT RATEDNOT RATEDNOT RATEDNOT RATEDNOT RATEDNOT RATED
MATERIAL AND LOCATION
(ANNQ) ALUMINUM ALLOY, QQ-A-250/5, ALLOY ALCLAD 2024, T4 BODY AND STEEL,FED STD 66,COMP 302,316,321 OR 416 PIN. AND STEEL,MIL-W-6101 SPRING

Manufacturer Part Numbers


Related Inventory



 
Top