ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-566-5360, 5340005665360
Cancelled -> Replaced by 2835005454897

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 005665360
Codification Country
United States
Item Name Code
INC 24328
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-566-5360
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-566-5360


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-566-5360

National Stock Number (NSN) 5340-00-566-5360, or NIIN 005665360, (seat,helical compression spring) was assigned January 1, 1963 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN replaces 1 stock number, 2835005454897.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Apr 25, 2008, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 24328. [A CIRCULAR ITEM, USUALLY HAVING A FLAT OR GROOVED FLANGE, BOSS(ES), AND/OR COUNTERBORE, DESIGNED TO ACCOMMODATE THE END OF THE SPRING. IT IS USED TO POSITION THE SPRING BUT DOES NOT ENCASE THE SPRING OR RESTRAIN LATERAL MOTION. IT MAY BE USED IN CONJUNCTION WITH A RETAINER,HELICAL COMPRESSION SPRING. EXCLUDES:WASHER (AS MODIFIED), SEAT,BALL SOCKET, AND HOLDER,SPRING. SEE ALSO ROTOR,ENGINE POPPET VALVE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340005665360 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(SURF) UNABLE TO DECODE
UNABLE TO DECODE
(MATL) UNABLE TO DECODE
OVERALL HEIGHT
(ABKW) 0.20000 INCHES MINIMUM AND 0.2200 INCHES MAXIMUM
MATERIAL
(MATT) ALUMINUM ALLOY,QQ-A-267 T4
SURFACE TREATMENT
(SURF) ANODIZED
MATERIAL
(MATL) ALUMINUM ALLOY,QQ-A-267 T4
MATERIAL HARDNESS RATING
(ALME) NOT RATED
DISTANCE FROM END TO FIRST STEP
(BZDH) 0.0600 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM
END DIAMETER
(BBRB) 0.6200 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM
BORE DIAMETER
(ABXV) 0.1920 INCHES MINIMUM AND 0.2920 INCHES MAXIMUM
DESIGN TYPE
(APGF) SOLID
FIRST STEP DIAMETER
(ABPR) 0.9000 INCHES MINIMUM AND 0.9200 INCHES MAXIMUM
FIRST STEP LENGTH
(ABPS) 0.0400 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM
OVERALL HEIGHT
(ABKW) 0.20 INCHES MINIMUM AND 0.22 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-A-267, T4 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) ALUMINUM ALLOY 2024
SECOND END DIAMETER
(AMFZ) 0.6850 INCHES MINIMUM AND 0.6950 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) SEAT
SURFACE TREATMENT
(SFTT) ANODIZE

Manufacturer Part Numbers


Related Inventory

73-704-048
Condition FN
57302 1/16X3/4
Readily Available
AS1037-0404
UNION
Readily Available
1294166-111
5340013370404
Condition NS
STRAP
Readily Available
88002325-101
5995013704043
Condition NS
CABLE ASSY
Readily Available
822-0370-404
Condition SV
AIR DATA COMPUT
Readily Available
10037-0404-04ALT
10037-0404-04
Condition FN
Desc: CIRCUIT C
Readily Available
10037-0404-04
Condition FN
Desc: CIRCUIT C
Readily Available


 
Top