ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-617-4647, 5340006174647
HINGE,BUTT

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 006174647
Codification Country
United States
Item Name Code
INC 22894
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-617-4647
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-617-4647


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-617-4647

National Stock Number (NSN) 5340-00-617-4647, or NIIN 006174647, (hinge,butt) was assigned January 1, 1963 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There are no manufacturer part numbers associated to this NSN.

This part number has not been procured by the US Government in over 5 years.

This NSN is assigned to Item Name Code (INC) 22894. [A HINGE USUALLY WITH RECTANGULARLY SHAPED LEAVES. THE DIMENSION PARALLEL TO THE HINGE PIN MUST BE GREATER THAN THE DIMENSION TRANSVERSE TO THE HINGE PIN. IT MAY HAVE A TENSION COIL SPRING AT ITS PIVOT(S) FOR CLOSING ACTION, AND MAY HAVE A THIRD MEMBER BETWEEN ITS PIVOT(S) TO PERMIT THE DOOR, OR THE LIKE, TO SWING IN AN ARC FROM EITHER SIDE.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340006174647 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(ANNR) UNABLE TO DECODE
SURFACE TREATMENT AND LOCATION
(ANNR) ENAMEL,FED STD 595,NO.24087 BODY
MATERIAL
(MATT) COPPER ALLOY BODY
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-B-626 COMPOSITION 1,HARD FED SPEC SINGLE MATERIAL RESPONSE PIN
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-B-626 COMPOSITION 260, 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE BODY
SURFACE TREATMENT
(SFTT) ENAMEL BODY
MATERIAL
(MATT) COPPER ALLOY AND NICKEL ALLOY PIN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) FED STD 595, NO. 24087 FED SPEC SINGLE TREATMENT RESPONSE BODY
DOOR LEAF OFFSET DISTANCE
(AKFR) 0.300 INCHES NOMINAL
BODY WIDTH
(ADAT) 1.250 INCHES NOMINAL
DEVELOPED DISTANCE FROM PIN CENTER TO OFFSET DOOR LEAF EDGE
(AKFV) 0.831 INCHES NOMINAL
HINGE MOUNTING TYPE
(AKER) HALF MORTISE
KNUCKLE QUANTITY
(AKEX) 5
KNUCKLE TYPE
(AKNB) FRICTION
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) UNABLE TO DECODE
MATERIAL THICKNESS
(ABPX) 0.078 INCHES NOMINAL
MATERIAL
(MATT) UNABLE TO DECODE
MOUNTING HOLE DIAMETER
(ABTB) 0.067 INCHES NOMINAL
MOUNTING HOLE QUANTITY
(ABTJ) 7
PERFORMANCE TYPE
(AGLD) MEDIUM DUTY
PIN CENTER TO BODY EDGE DISTANCE
(AKFK) 0.393 INCHES NOMINAL
PIN REMOVABILITY
(AKES) NONREMOVABLE
REVERSIBLE FEATURE
(AJNC) NOT INCLUDED
STYLE DESIGNATOR
(STYL) BUTT W/DOOR LEAF OFFSET
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) UNABLE TO DECODE
SURFACE TREATMENT
(SFTT) UNABLE TO DECODE
MATERIAL AND LOCATION
(ANNQ) BRASS,QQ-B-626 COMPOSITION 260,1/2 HARD,BODY,COPPER-NICKEL ALLOY COMOSITION 1,HARD,PIN
UNABLE TO DECODE
(ANNQ) UNABLE TO DECODE

Manufacturer Part Numbers


Related Inventory



 
Top