ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-685-1200, 5340006851200
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 006851200
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-685-1200
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-685-1200


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-685-1200

National Stock Number (NSN) 5340-00-685-1200, or NIIN 006851200, (bracket,double angle) was assigned January 1, 1963 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 2 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340006851200 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 0.630 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.063 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 0.620 INCHES NOMINAL
FABRICATION METHOD
(AARN) MACHINED
FIRST LEG ANGLE
(CSSQ) 125.0 DEGREES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.500 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.310 INCHES NOMINAL
FIRST LEG END RADIUS
(AJFP) 0.420 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE HOLE
FIRST LEG STYLE
(AJZU) END RADIUS
FIRST LEG THICKNESS
(AHPW) 0.063 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 0.620 INCHES NOMINAL
FIRST LEG HOLE DIAMETER
(AHLK) 0.209 INCHES NOMINAL
FIRST LEG LENGTH
(ADLK) 1.000 INCHES NOMINAL
FSC APPLICATION DATA
(ZZZV) ENGINE,JET ACFT
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) SAE30321 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 321
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.500 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.310 INCHES NOMINAL
SECOND LEG ANGLE
(CSSR) 125.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) IDENTICAL
SECOND LEG STYLE
(AKBU) END RADIUS
SECOND LEG THICKNESS
(AHPX) 0.063 INCHES NOMINAL
SECOND LEG END RADIUS
(AJFQ) 0.420 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) ONE HOLE
SECOND LEG HOLE DIAMETER
(AHLN) 0.281 INCHES NOMINAL
SECOND LEG LENGTH
(ADLL) 1.000 INCHES NOMINAL
SECOND LEG WIDTH
(AHLF) 0.620 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE
FABRICATION METHOD (NON-CORE)
(AARN) MACHINED

Manufacturer Part Numbers


Related Inventory



 
Top