ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-691-0169, 5340006910169
BRACKET,ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 006910169
Codification Country
United States
Item Name Code
INC 16900
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-691-0169
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-691-0169


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-691-0169

National Stock Number (NSN) 5340-00-691-0169, or NIIN 006910169, (bracket,angle) was assigned January 1, 1961 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 16900. [A RIDGE ITEM, USUALLY OF FLAT MATERIAL, FORMED INTO A DIHEDRAL ANGLE (GENERALLY A RIGHT ANGLE) WHICH MAY BE REINFORCED; IT IS DESIGNED TO POSITION, ALIGN, OR SUPPORT AN ITEM(S) IN RELATION TO ANOTHER. EXCLUDES:BRACE (AS MODIFIED); BRACKET (1), MOUNTING; AND BRACKET, SHELF.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340006910169 contains an unknown precious metal.

This NSN is associated to Schedule B 8302500000: hat-racks, hat pegs, brackets and similar fixtures, and parts thereof, of base metal. The Schedule B End Use is listed as cell phones and other household goods, n.e.c.. NAICS classification category 337127: institutional furniture manufacturing.

This information was last updated on .


Technical Characteristics

FABRICATION METHOD (NON-CORE)
(AARN) STAMPED
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.250 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.250 INCHES NOMINAL
FIRST LEG END RADIUS
(AJFP) 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE HOLE
FIRST LEG ANGLE
(CSSQ) 102.0 DEGREES NOMINAL
FIRST LEG STYLE
(AJZU) END RADIUS
FIRST LEG THICKNESS
(AHPW) 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
FIRST LEG WIDTH
(AHQN) 0.500 INCHES NOMINAL
FIRST LEG HOLE DIAMETER
(AHLK) 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 0.750 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 6350 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6355 ASSN STD 2ND MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 4130 OR STEEL COMP 8630
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.250 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.250 INCHES NOMINAL
SECOND LEG LENGTH
(ADLL) 2.215 INCHES NOMINAL
SECOND LEG OFFSET ANGLE
(CSSZ) 35.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG END RADIUS
(AJFQ) 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) ONE HOLE
SECOND LEG HOLE DIAMETER
(AHLN) 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM
SECOND LEG STYLE
(AKBU) END RADIUS
SECOND LEG THICKNESS
(AHPX) 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
SECOND LEG WIDTH
(AHLF) 0.500 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) OFFSET ANGLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) CADMIUM

Manufacturer Part Numbers


Related Inventory

15-03233
940-881
Condition NE
ROTAX 940-881 A
Readily Available
M24243/1-D604
5320-00-850-3233
Rivet
Readily Available
5320-00-850-3233
008503233.5320
Condition NS
RIVET, BLIND
Readily Available
7671CM24243/1-D604
5320-00-850-3233
Condition NE
RIVET,BLIND
Readily Available
25032338
5315011865183
Condition NS
KEY
Readily Available
25032338
Condition NS
PART
Readily Available


 
Top