ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-700-0122, 5340007000122
Cancelled -> Replaced by 5340006028628

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 007000122
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-700-0122
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-700-0122


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-700-0122

National Stock Number (NSN) 5340-00-700-0122, or NIIN 007000122, (bracket,double angle) was assigned January 1, 1963 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN replaces 1 stock number, 5340006028628.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 3 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340007000122 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 1.107 INCHES MINIMUM AND 1.137 INCHES MAXIMUM
CENTER SECTION THICKNESS
(AHQB) 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM
CENTER SECTION WIDTH
(AHQA) 0.500 INCHES NOMINAL
FABRICATION METHOD (NON-CORE)
(AARN) MACHINED
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
FIRST LEG END RADIUS
(AJFP) 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE HOLE
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
FIRST LEG STYLE
(AJZU) END RADIUS
FIRST LEG THICKNESS
(AHPW) 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM
FIRST LEG WIDTH
(AHQN) 0.560 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
FIRST LEG HOLE DIAMETER
(AHLK) 0.198 INCHES MINIMUM AND 0.208 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 0.611 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 410
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHLP) 2.226 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG CORNER RADIUS
(AHLG) 0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) CORNER RADIUS
SECOND LEG THICKNESS
(AHPX) 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) TWO HOLES
SECOND LEG HOLE DIAMETER
(AHLN) 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
SECOND LEG LENGTH
(ADLL) 0.768 INCHES MINIMUM AND 0.881 INCHES MAXIMUM
SECOND LEG WIDTH
(AHLF) 2.507 INCHES MINIMUM AND 2.570 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE

Manufacturer Part Numbers


Related Inventory

153882-100
142644
Condition NE
Loctite Handhel
Readily Available
7671CMS9388-210
Condition NE
O-RING
Readily Available
12387271-138
5305013882107
Condition NE
SCREW
Readily Available
MS9388-210
M83248/1-210
Condition FN
Desc: PACKING;
Readily Available


 
Top