ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-715-2832, 5340007152832
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 007152832
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-715-2832
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-715-2832


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-715-2832

National Stock Number (NSN) 5340-00-715-2832, or NIIN 007152832, (bracket,double angle) was assigned January 1, 1963 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340007152832 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 0.790 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.062 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 0.510 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.255 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.255 INCHES NOMINAL
FIRST LEG LENGTH
(ADLK) 0.897 INCHES NOMINAL
FIRST LEG OFFSET ANGLE
(CSSY) 30.0 DEGREES NOMINAL
FIRST LEG STYLE
(AJZU) END RADIUS
FIRST LEG THICKNESS
(AHPW) 0.062 INCHES NOMINAL
FIRST LEG END RADIUS
(AJFP) 0.255 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) ONE HOLE
FIRST LEG HOLE DIAMETER
(AHLK) 0.286 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 0.510 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 410
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.255 INCHES NOMINAL
SECOND LEG ANGLE
(CSSR) 97.5 DEGREES NOMINAL
SECOND LEG LENGTH
(ADLL) 1.175 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.255 INCHES NOMINAL
SECOND LEG END RADIUS
(AJFQ) 0.255 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) ONE HOLE
SECOND LEG HOLE DIAMETER
(AHLN) 0.226 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) END RADIUS
SECOND LEG THICKNESS
(AHPX) 0.062 INCHES NOMINAL
SECOND LEG WIDTH
(AHLF) 0.510 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) OFFSET DOUBLE ANGLE

Manufacturer Part Numbers


Related Inventory

G604323359
3300CZ-14
Condition NE
Socket 14mm 6 P
Readily Available
VXX-4323-3567-A120

Condition NE

Readily Available
000-295-04-83
9390012432335
Condition NS
BELLOWS
Readily Available


 
Top