ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-719-9966, 5340007199966
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 007199966
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-719-9966
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-719-9966


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-719-9966

National Stock Number (NSN) 5340-00-719-9966, or NIIN 007199966, (bracket,double angle) was assigned January 1, 1963 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340007199966 does not contain precious metals.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 1.680 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.058 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
CENTER SECTION WIDTH
(AHQA) 4.483 INCHES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHQU) 1.920 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.290 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 1.643 INCHES NOMINAL
FIRST LEG ANGLE
(CSSQ) 0.06 RADIANS NOMINAL
FIRST LEG SLOT LENGTH
(AHLL) 1.120 INCHES NOMINAL
FIRST LEG SLOT WIDTH
(AHLM) 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
FIRST LEG STYLE
(AJZU) SQUARE
FIRST LEG THICKNESS
(AHPW) 0.058 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) 2 SLOTS
FIRST LEG LENGTH
(ADLK) 0.580 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 4.483 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) AMS 5121 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL
(MATT) STEEL
SECOND LEG ANGLE
(CSSR) 0.06 RADIANS NOMINAL
SECOND LEG LENGTH
(ADLL) 1.100 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG THICKNESS
(AHPX) 0.058 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE

Manufacturer Part Numbers


Related Inventory

S1478-5GM
S1478-02
Condition NE
L-Selenomethion
Readily Available
A1478-5G
TCI-A1478-02
Condition NE
Lithium Acetoac
Readily Available
G4147802
T1005-2
Condition NE
2IN HUB, FLANGE
Readily Available
786GN6
14780_24_0
Condition NE
Stainless Steel
Readily Available
22GM15
01728
Condition NE
Silencer: For 4
Readily Available
616314-78026

Condition NE
PIP High-Visibi
Readily Available
01478020
MM01478020
Condition NE
Minuteman/Power
Readily Available
5JC27
4710011478024
Condition NS
TUBE
Readily Available
1294
4710011478024
Condition NS
TUBE
Readily Available
LD122-0003-0521
5315011147802
Condition NS
PIN
Readily Available
135292-2
4720014780258
Condition NS
HOSE
Readily Available
23511853
4710011478024
Condition NS
TUBE ASSY
Readily Available
23511858
4710011478024
Condition NS
TUBE ASSY
Readily Available
700-N800A1
5945001147802
Condition NS
RELAY
Readily Available


 
Top