ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-835-7556, 5340008357556
BRACKET,DOUBLE ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 008357556
Codification Country
United States
Item Name Code
INC 20354
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-835-7556
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-835-7556


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-835-7556

National Stock Number (NSN) 5340-00-835-7556, or NIIN 008357556, (bracket,double angle) was assigned December 5, 1966 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. One of those part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by 4 suppliers. Today, 2 suppliers are listed as Active suppliers for this NSN. Of the active suppliers, 2 suppliers are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is somewhat common among different platforms, belonging to 2 different weapons systems.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Dec 17, 2013, this NSN's acquisition method was noted as: Suitable for Competitive Acquisition. (Potential sources shall include dealers/distributors.) This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 20354. [A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH MAY BE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340008357556 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

CENTER SECTION HEIGHT
(AHPZ) 1.604 INCHES NOMINAL
CENTER SECTION THICKNESS
(AHQB) 0.059 INCHES NOMINAL
CENTER SECTION WIDTH
(AHQA) 1.404 INCHES NOMINAL
FABRICATION METHOD
(AARN) MACHINED
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.220 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.250 INCHES NOMINAL
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG CORNER RADIUS
(AHQP) 0.250 INCHES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHQU) 1.118 INCHES NOMINAL
FIRST LEG STYLE
(AJZU) CORNER RADIUS
FIRST LEG THICKNESS
(AHPW) 0.059 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) TWO HOLES
FIRST LEG HOLE DIAMETER
(AHLK) 0.281 INCHES NOMINAL
FIRST LEG LENGTH
(ADLK) 0.590 INCHES NOMINAL
FIRST LEG WIDTH
(AHQN) 1.618 INCHES NOMINAL
FSC APPLICATION DATA
(ZZZV) TURBOJET ENGINE,ACFT
MATERIAL
(MATT) TITANIUM ALLOY
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.230 INCHES NOMINAL
SECOND LEG ANGLE
(CSSR) 90.0 DEGREES NOMINAL
SECOND LEG LENGTH
(ADLL) 0.590 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.263 INCHES NOMINAL
SECOND LEG END RADIUS
(AJFQ) 0.375 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) ONE HOLE
SECOND LEG HOLE DIAMETER
(AHLN) 0.219 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) END RADIUS
SECOND LEG THICKNESS
(AHPX) 0.059 INCHES NOMINAL
SECOND LEG WIDTH
(AHLF) 0.837 INCHES NOMINAL
STYLE DESIGNATOR
(STYL) DOUBLE ANGLE
FABRICATION METHOD (NON-CORE)
(AARN) MACHINED

Manufacturer Part Numbers

566437

RNCC
5
RNVC
9
566437

RNCC
5
RNVC
9
566437

RNCC
5
RNVC
2
566437

RNCC
3
RNVC
2

Related Inventory

MJS3030ET088
2530015664374
Condition NS
CHAMBER
Readily Available


 
Top