ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-837-9473, 5340008379473
RETAINER,HELICAL COMPRESSION SPR

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 008379473
Codification Country
United States
Item Name Code
INC 24327
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-837-9473
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-837-9473


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-837-9473

National Stock Number (NSN) 5340-00-837-9473, or NIIN 008379473, (retainer,helical compression spr) was assigned December 9, 1966 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years, with the most recent procurement date of Apr 24, 2018. There has been one contract issued for this part number, with one award given. The US Government has only awarded those contracts to one supplier. The last contract numbers awarded were: SPE5E718V3471. The total value of the awarded contracts has been US$ 1,829.55.

There has been very little demand for this national stock number. The demand for this NSN originated from less than 5 countries. Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 24327. [A CYLINDRICAL ITEM SPECIFICALLY DESIGNED TO FIT OVER THE END OF AND COMPLETELY ENCASE THE SPRING. THE OPEN END IS USUALLY FLANGED; THE OPPOSITE END MAY BE CLOSED OR HAVE AN ORIFICE TO ACCOMMODATE A GUIDE, PLUNGER, OR THE LIKE. IT IS USED TO POSITION THE SPRING AND RESTRAIN LATERAL MOTION. IT MAY PROVIDE A SEAT FOR THE SPRING. EXCLUDES:HOLDER,SPRING.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340008379473 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(MATL) UNABLE TO DECODE
MATERIAL
(MATL) ALUMINUM ALLOY COMP 355 OR 356
END HOLE DIAMETER
(BWRC) 0.736 INCHES MINIMUM AND 0.738 INCHES MAXIMUM
BODY INSIDE DIAMETER
(ADAS) 2.812 INCHES NOMINAL
BODY OUTSIDE DIAMETER
(ADAR) 3.337 INCHES MINIMUM AND 3.340 INCHES MAXIMUM
CASEHARDENING INDICATOR
(AASG) NOT CASEHARDENED
FLANGE DIAMETER
(ABKK) 3.656 INCHES NOMINAL
FLANGE THICKNESS
(ABKU) 0.125 INCHES NOMINAL
OVERALL HEIGHT
(ABKW) 3.582 INCHES NOMINAL
MATERIAL
(MATT) ALUMINUM ALLOY 355.0 OR ALUMINUM ALLOY 356.0
MOUNTING HOLE DIAMETER
(ABTB) 0.375 INCHES NOMINAL
SPECIAL FEATURES
(FEAT) 1.000 IN. NOM OD BY 1.500 IN. NOMLG SEAT OVER WHICH SPRING FITS,FLANGEDEND EXTERNALLY THREADED W/3.312-20 THREADS,0.437 IN. NOM LG
STYLE DESIGNATOR
(STYL) IRREGULAR
MATERIAL
(MATT) ALUMINUM ALLOY COMP 355 OR 356
MOUNTING HOLE DIAMETER
(ABTB) 0.375 NOMINAL INCHES

Manufacturer Part Numbers


Related Inventory

315A1827-1
Condition FN
RING
Readily Available
E81A-1827-1
A-1827-1
Condition NE
Electron Beam T
Readily Available
DTA182718-2
5340015329839
Condition NS
RUNNER
Readily Available
DTA182717
5340015329849
Condition NS
RUNNER
Readily Available
DTA182718-1
5340 01 532 9844
RUNNER
Request


 
Top