ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-938-0547, 5340009380547
BRACKET,ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 009380547
Codification Country
United States
Item Name Code
INC 16900
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Request Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-938-0547
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-938-0547


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-938-0547

National Stock Number (NSN) 5340-00-938-0547, or NIIN 009380547, (bracket,angle) was assigned February 27, 1970 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Sep 02, 2005, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 16900. [A RIDGE ITEM, USUALLY OF FLAT MATERIAL, FORMED INTO A DIHEDRAL ANGLE (GENERALLY A RIGHT ANGLE) WHICH MAY BE REINFORCED; IT IS DESIGNED TO POSITION, ALIGN, OR SUPPORT AN ITEM(S) IN RELATION TO ANOTHER. EXCLUDES:BRACE (AS MODIFIED); BRACKET (1), MOUNTING; AND BRACKET, SHELF.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340009380547 contains an unknown precious metal.

This NSN is associated to Schedule B 8302500000: hat-racks, hat pegs, brackets and similar fixtures, and parts thereof, of base metal. The Schedule B End Use is listed as cell phones and other household goods, n.e.c.. NAICS classification category 337127: institutional furniture manufacturing.

This information was last updated on .


Technical Characteristics

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 1.200 INCHES MINIMUM AND 1.240 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
FIRST LEG CORNER RADIUS
(AHQP) 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHQU) 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
FIRST LEG LENGTH
(ADLK) 2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM
FIRST LEG STYLE
(AJZU) CORNER RADIUS
FIRST LEG THICKNESS
(AHPW) 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) TWO HOLES
FIRST LEG HOLE DIAMETER
(AHLK) 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
FIRST LEG WIDTH
(AHQN) 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
MATERIAL
(MATT) STEEL COMP 1020
MOUNTING HOLE TYPE
(ACHY) COUNTERSUNK
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH
(AHLS) 1.310 INCHES NOMINAL
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH
(AHLQ) 1.950 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.300 INCHES MINIMUM AND 0.360 INCHES MAXIMUM
SECOND LEG CORNER RADIUS
(AHLG) 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH
(AHLT) 1.030 INCHES NOMINAL
SECOND LEG LENGTH
(ADLL) 14.870 INCHES MINIMUM AND 14.890 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) THREE HOLES
SECOND LEG HOLE DIAMETER
(AHLN) 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
SECOND LEG STYLE
(AKBU) CORNER RADIUS
SECOND LEG THICKNESS
(AHPX) 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
SECOND LEG WIDTH
(AHLF) 1.210 INCHES MINIMUM AND 1.990 INCHES MAXIMUM
STYLE DESIGNATOR
(STYL) ANGLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
(STDC) AMS 2485 ASSN STD SINGLE TREATMENT RESPONSE
SURFACE TREATMENT
(SFTT) OXIDE
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH
(AHLS) 1.310 NOMINAL INCHES

Manufacturer Part Numbers


Related Inventory



 
Top