ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-00-986-7815, 5340009867815
SEAT,HELICAL COMPRESSION SPRING

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 009867815
Codification Country
United States
Item Name Code
INC 24328
Criticality
(F) This item is a Flight Safety Critical Aircraft Part (FSCAP).
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-00-986-7815
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-00-986-7815


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-00-986-7815

National Stock Number (NSN) 5340-00-986-7815, or NIIN 009867815, (seat,helical compression spring) was assigned January 1, 1962 in the Federal Logistics Information System (FLIS). This NIIN is Available for Manual Assignment. This NSN does not replace any other NSNs.

There is only one manufacturer part number associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, only one supplier is deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

This NSN is unique to one weapons system.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Aug 02, 2005, this NSN's acquisition method was noted as: Acquire, for the first time, directly from the actual manufacturer rather than the prime contractor who is not the actual manufacturer. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 24328. [A CIRCULAR ITEM, USUALLY HAVING A FLAT OR GROOVED FLANGE, BOSS(ES), AND/OR COUNTERBORE, DESIGNED TO ACCOMMODATE THE END OF THE SPRING. IT IS USED TO POSITION THE SPRING BUT DOES NOT ENCASE THE SPRING OR RESTRAIN LATERAL MOTION. IT MAY BE USED IN CONJUNCTION WITH A RETAINER,HELICAL COMPRESSION SPRING. EXCLUDES:WASHER (AS MODIFIED), SEAT,BALL SOCKET, AND HOLDER,SPRING. SEE ALSO ROTOR,ENGINE POPPET VALVE.]. This item is a Flight Safety Critical Aircraft Part (FSCAP). There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340009867815 contains an unknown precious metal.

This information was last updated on .


Technical Characteristics

UNABLE TO DECODE
(MATL) UNABLE TO DECODE AND UNABLE TO DECODE
MATERIAL
(MATL) STEEL, QQ-S-763, CLASS 304 AND STEEL, QQ-S-763, CLASS 303SE, COND A
END DIAMETER
(BBRB) 0.2670 INCHES MINIMUM AND 0.2730 INCHES MAXIMUM
DESIGN TYPE
(APGF) SOLID
DISTANCE FROM END TO FIRST STEP
(BZDH) 0.0880 INCHES MINIMUM AND 0.0920 INCHES MAXIMUM
FIRST STEP LENGTH
(ABPS) 0.0480 INCHES MINIMUM AND 0.0520 INCHES MAXIMUM
FIRST STEP DIAMETER
(ABPR) 0.4000 INCHES NOMINAL
OVERALL HEIGHT
(ABKW) 0.2100 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-S-763, CLASS 304 FED SPEC 1ST MATERIAL RESPONSE AND QQ-S-763, CLASS 303SE, COND A FED SPEC 2ND MATERIAL RESPONSE
MATERIAL
(MATT) STEEL COMP 304 AND STEEL COMP 303SE
SECOND END DIAMETER
(AMFZ) 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
SPECIAL FEATURES
(FEAT) NOT CASEHARDENED;HARDNESS-ROCKWELL 15T SCALE,93 MAX HARDNESS

Manufacturer Part Numbers


Related Inventory

20-565-482
Condition FN
0.2550 DEC CAR
Readily Available
G2565482
3182 06 00
Condition NE
Elbow, 6mm Tube
Readily Available
12256548-2
3040011217741
Condition NS
CONNECTING LINK
Readily Available
MS21919WCJ10
5340011565482
Condition NS
CLAMP
Readily Available
565482
GSKT
Readily Available
C65654827N
Condition FN
VALVE PRESSURE,
Readily Available
MS21919WCJ10
5340-01-156-5482
Condition NE
Clamp - 5/8" Di
Request


 
Top