ISO Group Logo
Defense and Aerospace
Supply Chain Partner
A Dynatech International Company


NSN 5340-01-010-5386, 5340010105386
BRACKET,ANGLE

Federal Supply Classification
FSC 5340 - Hardware, Commercial
National Item Identification Number
NIIN 010105386
Codification Country
United States
Item Name Code
INC 16900
Criticality
(X) This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Hazardous Material Indicator Code
(P) There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Availability: Readily Available Qualified Suppliers: Currently qualifying suppliers

Manufacture or supply this part?
Join our growing community of certified suppliers.

Let Us Know
  CALL ABOUT NSN 5340-01-010-5386
Our client representatives are standing by to help fulfill your request.

+1-321-773-5710

  REQUEST QUOTE for 5340-01-010-5386


Have a list that needs to be quoted? Upload it here.

DLMS® Summary

National Stock Number 5340-01-010-5386

National Stock Number (NSN) 5340-01-010-5386, or NIIN 010105386, (bracket,angle) was assigned October 2, 1975 in the Federal Logistics Information System (FLIS). NIIN 010105386 was cancelled on December 5, 2019, with a cancelled status of "Item is Cancelled - Inactive." There is no known replacement specified for this stock number. This NSN does not replace any other NSNs.

There are 2 manufacturer part numbers associated with this NSN. None of the associated part number(s) are considered obsolete. The manufacturer part numbers were originally supplied by one supplier. Today, one supplier is listed as an Active supplier for this NSN. Of the active suppliers, there are no suppliers that are deemed design controlled or valid supply parts.

This part number has not been procured by the US Government in over 5 years.

Based on a planned procurement review by the Primary Inventory Control Activity (PICA) on Oct 02, 2020, this NSN's acquisition method was noted as: Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer. The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.

This NSN is assigned to Item Name Code (INC) 16900. [A RIDGE ITEM, USUALLY OF FLAT MATERIAL, FORMED INTO A DIHEDRAL ANGLE (GENERALLY A RIGHT ANGLE) WHICH MAY BE REINFORCED; IT IS DESIGNED TO POSITION, ALIGN, OR SUPPORT AN ITEM(S) IN RELATION TO ANOTHER. EXCLUDES:BRACE (AS MODIFIED); BRACKET (1), MOUNTING; AND BRACKET, SHELF.]. This item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. NSN 5340010105386 does not contain precious metals.

This information was last updated on .


Technical Characteristics

SECOND LEG LENGTH
(ADLL) 0.795 INCHES MINIMUM AND 0.805 INCHES MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHQU) 1.187 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHRB) 0.173 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
UNABLE TO DECODE
(AKBU) UNABLE TO DECODE
MATERIAL DOCUMENT AND CLASSIFICATION
(MDCL) QQ-A-250/11,T4 FED SPEC SINGLE MATERIAL RESPONSE
UNABLE TO DECODE
(AHLP) UNABLE TO DECODE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
(AHLW) 0.218 INCHES NOMINAL
SECOND LEG THICKNESS
(AHPX) 0.125 INCHES NOMINAL
UNABLE TO DECODE
(AHRB) UNABLE TO DECODE AND UNABLE TO DECODE
UNABLE TO DECODE
(AJZU) UNABLE TO DECODE
UNABLE TO DECODE
(AHLN) UNABLE TO DECODE
UNABLE TO DECODE
(AHPW) UNABLE TO DECODE
UNABLE TO DECODE
(AHQN) UNABLE TO DECODE
SECOND LEG HOLE ARRANGEMENT STYLE
(AKCU) TWO HOLES
UNABLE TO DECODE
(CSSP) UNABLE TO DECODE
UNABLE TO DECODE
(MATT) UNABLE TO DECODE
UNABLE TO DECODE
(AHLF) UNABLE TO DECODE
UNABLE TO DECODE
(AHRA) UNABLE TO DECODE
FIRST LEG HOLE ARRANGEMENT STYLE
(AKAU) TWO HOLES
SECOND LEG STYLE
(AKBU) SQUARE
SECOND LEG RELATIONSHIP TO FIRST LEG
(CSSP) NOT IDENTICAL
MATERIAL
(MATT) ALUMINUM ALLOY 6061
STYLE DESIGNATOR
(STYL) ANGLE
SECOND LEG WIDTH
(AHLF) 1.687 INCHES NOMINAL
FIRST LEG HOLE DIAMETER
(AHLK) 0.140 INCHES NOMINAL
UNABLE TO DECODE
(AHLW) UNABLE TO DECODE
UNABLE TO DECODE
(AKCU) UNABLE TO DECODE
FABRICATION METHOD (NON-CORE)
(AARN) MACHINED
SECOND LEG HOLE DIAMETER
(AHLN) 0.138 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHLV) 0.187 INCHES NOMINAL
UNABLE TO DECODE
(ADLL) UNABLE TO DECODE AND UNABLE TO DECODE
FIRST LEG WIDTH
(AHQN) 1.687 INCHES NOMINAL
UNABLE TO DECODE
(AHQU) UNABLE TO DECODE
UNABLE TO DECODE
(AKAU) UNABLE TO DECODE
FIRST LEG LENGTH
(ADLK) 0.485 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
UNABLE TO DECODE
(ADLK) UNABLE TO DECODE AND UNABLE TO DECODE
UNABLE TO DECODE
(AHLV) UNABLE TO DECODE
FIRST LEG ANGLE
(CSSQ) 90.0 DEGREES NOMINAL
UNABLE TO DECODE
(CSSQ) UNABLE TO DECODE
UNABLE TO DECODE
(STYL) UNABLE TO DECODE
FIRST LEG STYLE
(AJZU) SQUARE
UNABLE TO DECODE
(MDCL) UNABLE TO DECODE
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
(AHLP) 1.312 INCHES NOMINAL
UNABLE TO DECODE
(AHLK) UNABLE TO DECODE
FIRST LEG THICKNESS
(AHPW) 0.125 INCHES NOMINAL
UNABLE TO DECODE
(AHPX) UNABLE TO DECODE
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
(AHRA) 0.250 INCHES NOMINAL


Related Inventory

ACG7435-505
Condition FN
ROD AY
Readily Available


 
Top